Commit graph

834 commits

Author SHA1 Message Date
mainboarder c533991519
Expanded minimum RSA Keylength to 3072 (#26604)
German Federal Office for Information Security requests in its technical
guideline BSI TR-02102-1 RSA Keylength not shorter than 3000bits
starting 2024, in the year 2023 3000bits as a recommendation. Gitea
should request longer RSA Keys by default in favor of security and drop
old clients which do not support longer keys.


https://www.bsi.bund.de/SharedDocs/Downloads/DE/BSI/Publikationen/TechnischeRichtlinien/TR02102/BSI-TR-02102.pdf?__blob=publicationFile&v=9
- Page 19, Table 1.2

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-28 00:53:16 +00:00
techknowlogick b3f7137174
Update minimum password length requirements (#25946) 2023-08-21 19:27:50 +00:00
wxiaoguang ed1be4ca68
Handle base64 decoding correctly to avoid panic (#26483)
Fix the panic if the "base64 secret" is too long.
2023-08-14 10:30:16 +00:00
Lunny Xiao 389fb754a2
Fix storage path logic especially for relative paths (#26441)
This PR rewrites the function `getStorage` and make it more clear.

Include tests from #26435, thanks @earl-warren

---------

Co-authored-by: Earl Warren <contact@earl-warren.org>
2023-08-13 22:09:25 +02:00
wxiaoguang bcccf4c0d6
Remove last newline from config file (#26468)
When users put the secrets into a file (GITEA__sec__KEY__FILE), the
newline sometimes is different to avoid (eg: echo/vim/...)

So the last newline could be removed when reading, it makes the users
easier to maintain the secret files.

Co-authored-by: Giteabot <teabot@gitea.io>
2023-08-12 15:28:35 +00:00
Denys Konovalov 63ab92d797
Pre-register OAuth2 applications for git credential helpers (#26291)
This PR is an extended implementation of #25189 and builds upon the
proposal by @hickford in #25653, utilizing some ideas proposed
internally by @wxiaoguang.

Mainly, this PR consists of a mechanism to pre-register OAuth2
applications on startup, which can be enabled or disabled by modifying
the `[oauth2].DEFAULT_APPLICATIONS` parameter in app.ini. The OAuth2
applications registered this way are being marked as "locked" and
neither be deleted nor edited over UI to prevent confusing/unexpected
behavior. Instead, they're being removed if no longer enabled in config.


![grafik](https://github.com/go-gitea/gitea/assets/47871822/81a78b1c-4b68-40a7-9e99-c272ebb8f62e)

The implemented mechanism can also be used to pre-register other OAuth2
applications in the future, if wanted.

Co-authored-by: hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>

---------

Co-authored-by: M Hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-09 14:24:07 +02:00
Lunny Xiao 96f151392f
Fix the wrong derive path (#26271)
This PR will fix #26264, caused by #23911.

The package configuration derive is totally wrong when storage type is
local in that PR.

This PR fixed the inherit logic when storage type is local with some
unit tests.

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-04 03:41:16 +00:00
wxiaoguang 54c28fddd8
Clarify the logger's MODE config option (#26267)
1. Fix the wrong document (add the missing `MODE=`)
2. Add a more friendly log message to tell users to add `MODE=` in their
config

Co-authored-by: Giteabot <teabot@gitea.io>
2023-08-01 18:28:23 +00:00
Panagiotis "Ivory" Vasilopoulos d58c542579
Add 'Show on a map' button to Location in profile, fix layout (#26214)
Not too important, but I think that it'd be a pretty neat touch.

Also fixes some layout bugs introduced by a previous PR.

---------

Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-07-31 08:44:45 +00:00
Lunny Xiao ce27de4d48
Fix allowed user types setting problem (#26200)
Fix #25951
2023-07-28 12:15:39 -04:00
wxiaoguang 8baa42c8d7
Calculate MAX_WORKERS default value by CPU number (#26177)
To avoid consuming user's 100% CPU, limit the default value of
MAX_WORKERS

Fix #26063 (the CPU 100% problem mentioned in it)
2023-07-27 16:40:35 +08:00
Lunny Xiao 5dc37ef97a
Display deprecated warning in admin panel pages as well as in the log file (#26094)
This PR includes #26007 's changes but have a UI to prompt administrator
about the deprecated settings as well as the log or console warning.
Then users will have enough time to notice the problem and don't have
surprise like before.

<img width="1293" alt="图片"
src="https://github.com/go-gitea/gitea/assets/81045/c33355f0-1ea7-4fb3-ad43-cd23cd15391d">

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-07-26 03:53:37 +00:00
Jason Song 862f748b2b
Fix loading LFS_JWT_SECRET from wrong section (#26109)
Regression of #25408.

`LFS_JWT_SECRET_URI` and `LFS_JWT_SECRET` are under the `server`
section, not `lfs`.

So each time gitea restarts, it resets `LFS_JWT_SECRET`.

<img width="1378" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/527ec9b9-eea2-4334-a274-6d1471456edd">
2023-07-25 05:06:31 +00:00
wxiaoguang d0bdfbc545
Avoid writing config file if not installed (#26107)
Just like others (oauth2 secret, internal token, etc), do not generate
if no install lock
2023-07-25 04:03:41 +00:00
wxiaoguang 52fb936773
Serve pre-defined files in "public", add "security.txt", add CORS header for ".well-known" (#25974)
Replace #25892

Close  #21942
Close  #25464

Major changes:

1. Serve "robots.txt" and ".well-known/security.txt" in the "public"
custom path
* All files in "public/.well-known" can be served, just like
"public/assets"
3. Add a test for ".well-known/security.txt"
4. Simplify the "FileHandlerFunc" logic, now the paths are consistent so
the code can be simpler
5. Add CORS header for ".well-known" endpoints
6. Add logs to tell users they should move some of their legacy custom
public files

```
2023/07/19 13:00:37 cmd/web.go:178:serveInstalled() [E] Found legacy public asset "img" in CustomPath. Please move it to /work/gitea/custom/public/assets/img
2023/07/19 13:00:37 cmd/web.go:182:serveInstalled() [E] Found legacy public asset "robots.txt" in CustomPath. Please move it to /work/gitea/custom/public/robots.txt
```
This PR is not breaking.

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-07-21 12:14:20 +00:00
wxiaoguang 28ecac8024
Fix env config parsing for "GITEA____APP_NAME" (#26001)
Regression of #24832 

Fix the bug and add a test for it

Co-authored-by: Giteabot <teabot@gitea.io>
2023-07-20 09:16:29 +00:00
wxiaoguang 50e14699d3
Update path related documents (#25417)
Update WorkPath/WORK_PATH related documents, remove out-dated
information.

Remove "StaticRootPath" on the admin config display page, because few
end user really need it, it only causes misconfiguration.


![image](https://github.com/go-gitea/gitea/assets/2114189/8095afa4-da76-436b-9e89-2a92c229c01d)

Co-authored-by: Giteabot <teabot@gitea.io>
2023-07-19 11:22:57 +02:00
wxiaoguang cc73e84fa3
Avoid creating directories when loading config (#25944)
The "creating dir/file during load config" is a longstanding and complex
problem.

This PR only does a quick patch, it still needs more refactorings in the
future.

Fix #25938
2023-07-18 07:32:36 -05:00
KN4CK3R 81a8120bc3
Add shutting down notice (#25920)
Got the same problem as #25915 when updating an instance. The
`log.Fatal` should have been marked as breaking in #23911.

This PR adds a notice that the system is shutting down because of the
deprecated setting.
2023-07-17 10:58:47 +02:00
wxiaoguang fa0b5b14c2
Make "install page" respect environment config (#25648)
Replace #25580

Fix #19453

The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.

So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.

And, to make things clear, there are enough messages on the UI to tell
users what will happen.

There are some necessary/related changes to `environment-to-ini.go`:

* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.


![image](https://github.com/go-gitea/gitea/assets/2114189/12778ee4-3fb5-4664-a73a-41ebbd77cd5b)
2023-07-09 22:43:37 +00:00
silverwind 88f835192d
Replace interface{} with any (#25686)
Result of running `perl -p -i -e 's#interface\{\}#any#g' **/*` and `make fmt`.

Basically the same [as golang did](2580d0e08d).
2023-07-04 18:36:08 +00:00
techknowlogick 469d89b95a
Set SSH_AUTHORIZED_KEYS_BACKUP to false (#25412)
This prevents the disk from overflowing with auth keys file

Fixes #17117

## ⚠️ BREAKING

This changes the default option for creating a backup of the authorized
key file when an update is made to default to false.
2023-07-01 04:07:48 +00:00
Jason Song 67bd9d4f1e
Restrict [actions].DEFAULT_ACTIONS_URL to only github or self (#25581)
Resolve #24789

## ⚠️ BREAKING ⚠️

Before this, `DEFAULT_ACTIONS_URL` cound be set to any custom URLs like
`https://gitea.com` or `http://your-git-server,https://gitea.com`, and
the default value was `https://gitea.com`.

But now, `DEFAULT_ACTIONS_URL` supports only
`github`(`https://github.com`) or `self`(the root url of current Gitea
instance), and the default value is `github`.

If it has configured with a URL, an error log will be displayed and it
will fallback to `github`.

Actually, what we really want to do is always make it
`https://github.com`, however, this may not be acceptable for some
instances of internal use, so there's extra support for `self`, but no
more, even `https://gitea.com`.

Please note that `uses: https://xxx/yyy/zzz` always works and it does
exactly what it is supposed to do.

Although it's breaking, I belive it should be backported to `v1.20` due
to some security issues.

Follow-up on the runner side:

- https://gitea.com/gitea/act_runner/pulls/262
- https://gitea.com/gitea/act/pulls/70
2023-06-30 07:26:36 +00:00
wxiaoguang b4d0036fc3
Do not prepare oauth2 config if it is not enabled, do not write config in some sub-commands (#25567)
Ref:

* https://github.com/go-gitea/gitea/issues/25377#issuecomment-1609757289

And some sub-commands like "generate" / "docs", they do not need to use
the ini config
2023-06-28 23:30:06 +02:00
wxiaoguang 65d3e1161b
Fix sub-command log level (#25537)
More fix for #24981

* #24981


Close #22361

* #22361

There were many patches for Gitea's sub-commands to satisfy the facts:

* Some sub-commands shouldn't output any log, otherwise the git protocol
would be broken
* Sometimes the users want to see "verbose" or "quiet" outputs

That's a longstanding problem, and very fragile. This PR is only a quick
patch for the problem.

In the future, the sub-command system should be refactored to a clear
solution.

----

Other changes:

* Use `ReplaceAllWriters` to replace
`RemoveAllWriters().AddWriters(writer)`, then it's an atomic operation.
* Remove unnecessary `syncLevelInternal` calls, because
`AddWriters/addWritersInternal` already calls it.

Co-authored-by: Giteabot <teabot@gitea.io>
2023-06-28 08:02:06 +02:00
wxiaoguang cc1d61f1f5
Use InitWorkPathAndCfgProvider for environment-to-ini to avoid unnecessary checks (#25480)
Fix #25481

The `InitWorkPathAndCommonConfig` calls `LoadCommonSettings` which does
many checks like "current user is root or not".

Some commands like "environment-to-ini" shouldn't do such check, because
it might be run with "root" user at the moment (eg: the docker's setup
script)

ps: in the future, the docker's setup script should be improved to avoid
Gitea's command running with "root"
2023-06-24 09:13:35 +00:00
techknowlogick c0fc53e226
Import additional secrets via file uri (#25408) 2023-06-23 00:16:12 +00:00
wxiaoguang ce46834b93
Remove "CHARSET" config option for MySQL, always use "utf8mb4" (#25413)
In modern days, there is no reason to make users set "charset" anymore.

Close #25378

## ⚠️ BREAKING

The key `[database].CHARSET` was removed completely as every newer
(>10years) MySQL database supports `utf8mb4` already.
There is a (deliberately) undocumented new fallback option if anyone
still needs to use it, but we don't recommend using it as it simply
causes problems.
2023-06-21 10:49:25 +00:00
wxiaoguang 2cdf260f42
Refactor path & config system (#25330)
# The problem

There were many "path tricks":

* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
    * The "serv" process started by OpenSSH server
    * The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling

# The solution

* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.

The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default

The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default


## ⚠️ BREAKING

If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.



----

Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503

Replace #23301
Replace #22754

And maybe more
2023-06-21 13:50:26 +08:00
wxiaoguang df5cf5ddbd
Avoid polluting config file when "save" (#25395)
That's a longstanding INI package problem: the "MustXxx" calls change
the option values, and the following "Save" will save a lot of garbage
options into the user's config file.

Ideally we should refactor the INI package to a clear solution, but it's
a huge work.

A clear workaround is what this PR does: when "Save", load a clear INI
instance and save it.

Partially fix #25377, the "install" page needs more fine tunes.
2023-06-21 10:31:40 +08:00
wxiaoguang a5d0246fff
Avoid polluting the config (#25345)
Caught by #25330

Co-authored-by: Giteabot <teabot@gitea.io>
2023-06-18 16:10:44 +00:00
Lunny Xiao d6dd6d641b
Fix all possible setting error related storages and added some tests (#23911)
Follow up #22405

Fix #20703 

This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.

- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-06-14 11:42:38 +08:00
wxiaoguang de4a21fcb4
Refactor INI package (first step) (#25024)
The INI package has many bugs and quirks, and in fact it is
unmaintained.

This PR is the first step for the INI package refactoring: 

* Use Gitea's "config_provider" to provide INI access
* Deprecate the INI package by golangci.yml rule
2023-06-02 17:27:30 +08:00
silverwind 50bd7d0b24
Remove the service worker (#25010)
It's been disabled by default since 1.17
(https://github.com/go-gitea/gitea/pull/18914), and it never really
delivered any benefit except being another cache layer that has its own
unsolved invalidation issues. HTTP cache works, we don't need two cache
layers at the browser for assets.

## ⚠️ BREAKING

You can remove the config `[ui].USE_SERVICE_WORKER` from your `app.ini`
now.
2023-05-31 02:07:04 +00:00
silverwind c7612d178c
Remove meta tags theme-color and default-theme (#24960)
As discussed in
https://github.com/go-gitea/gitea/pull/24953#issuecomment-1565630156.

## ⚠️ BREAKING ⚠️

1. The `ui.THEME_COLOR_META_TAG` setting has been removed. If you still
need to set the `theme-color` meta tag, add it via
`$GITEA_CUSTOM/templates/custom/header.tmpl` instead.

2. The non-standard `default-theme` meta-tag added in
https://github.com/go-gitea/gitea/pull/13809 has been removed. Third
party code that needs to obtain the currently loaded theme should use
the `theme-<name>` class on the `<html>` node instead, which reflect the
currently active theme.
2023-05-28 22:33:17 +00:00
wxiaoguang 2f149c5c9d
Use [git.config] for reflog cleaning up (#24958)
Follow
https://github.com/go-gitea/gitea/pull/24860#discussion_r1200589651

Use `[git.config]` for reflog cleaning up, the new options are more
flexible.

*
https://git-scm.com/docs/git-config#Documentation/git-config.txt-corelogAllRefUpdates
*
https://git-scm.com/docs/git-config#Documentation/git-config.txt-gcreflogExpire

## ⚠️ BREAKING

The section `[git.reflog]` is now obsolete and its keys have been moved
to the following replacements:
- `[git.reflog].ENABLED` → `[git.config].core.logAllRefUpdates`
- `[git.reflog].EXPIRATION` → `[git.config].gc.reflogExpire`
2023-05-28 01:07:14 +00:00
JakobDev aaa1094663
Add the ability to pin Issues (#24406)
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves #2175.

## Screenshots

![grafik](https://user-images.githubusercontent.com/15185051/235123207-0aa39869-bb48-45c3-abe2-ba1e836046ec.png)

![grafik](https://user-images.githubusercontent.com/15185051/235123297-152a16ea-a857-451d-9a42-61f2cd54dd75.png)

![grafik](https://user-images.githubusercontent.com/15185051/235640782-cbfe25ec-6254-479a-a3de-133e585d7a2d.png)

The Design was mostly copied from the Projects Board.

## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.

## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration

**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-25 15:17:19 +02:00
techknowlogick 033d92997f
Allow skipping forks and mirrors from being indexed (#23187)
This PR adds two new options to disable repo/code search indexing of
both forks and mirrors.

Related: #22842
2023-05-25 16:13:47 +08:00
wxiaoguang 5f39285d6d
Improve RunMode / dev mode (#24886)
1. non-dev mode is treated as prod mode, to protect users from
accidentally running in dev mode if there is a typo in this value.
2. in dev mode, do not need to really exit if there are template errors,
because the template errors could be fixed by developer soon and the
templates get reloaded, help:
* https://github.com/go-gitea/gitea/issues/24845#issuecomment-1557615382
3. Fine tune the mail template loading message.
2023-05-25 03:47:30 +00:00
wxiaoguang c21605951b
Make environment-to-ini support loading key value from file (#24832)
Replace #19857

Close #19856
Close #10311
Close #10123

Major changes:

1. Move a lot of code from `environment-to-ini.go` to `config_env.go` to
make them testable.
2. Add `__FILE` support
3. Update documents
4. Add tests
2023-05-24 11:37:22 +08:00
wxiaoguang 8080ace6fc
Support changing git config through app.ini, use diff.algorithm=histogram by default (#24860)
Close #13454 , Close #23255, Close #14697 (and maybe more related
issues)

Many users have the requirement to customize the git config. This PR
introduces an easy way: put the options in Gitea's app.ini
`[git.config]`, then the config options will be applied to git config.

And it can support more flexible default config values, eg: now
`diff.algorithm=histogram` by default. According to:
https://stackoverflow.com/a/32367597/4754037 , `histogram diff` is
efficient and doesn't like to cause server-side problems.

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-23 16:30:19 +00:00
KN4CK3R cdb088cec2
Add CRAN package registry (#22331)
This PR adds a [CRAN](https://cran.r-project.org/) package registry.

![grafik](https://user-images.githubusercontent.com/1666336/210450039-d6fa6f77-20cd-4741-89a8-1624def267f7.png)
2023-05-22 10:57:49 +08:00
wxiaoguang 2cb66fff60
Support wildcard in email domain allow/block list (#24831)
Replace #20257 (which is stale and incomplete)

Close #20255

Major changes:

* Deprecate the "WHITELIST", use "ALLOWLIST"
* Add wildcard support for EMAIL_DOMAIN_ALLOWLIST/EMAIL_DOMAIN_BLOCKLIST
* Update example config file and document
* Improve tests
2023-05-22 00:05:44 +00:00
wxiaoguang 4647660776
Rewrite logger system (#24726)
## ⚠️ Breaking

The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.

Although many legacy options still work, it's encouraged to upgrade to
the new options.

The SMTP logger is deleted because SMTP is not suitable to collect logs.

If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.

## Description

Close #12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)

Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)

There is a new document (with examples): `logging-config.en-us.md`

This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.

## The old problems

The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.


## The new design

See `logger.go` for documents.


## Screenshot

<details>


![image](https://github.com/go-gitea/gitea/assets/2114189/4462d713-ba39-41f5-bb08-de912e67e1ff)


![image](https://github.com/go-gitea/gitea/assets/2114189/b188035e-f691-428b-8b2d-ff7b2199b2f9)


![image](https://github.com/go-gitea/gitea/assets/2114189/132e9745-1c3b-4e00-9e0d-15eaea495dee)

</details>

## TODO

* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)

---------

Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-21 22:35:11 +00:00
FuXiaoHei c757765a9e
Implement actions artifacts (#22738)
Implement action artifacts server api.

This change is used for supporting
https://github.com/actions/upload-artifact and
https://github.com/actions/download-artifact in gitea actions. It can
run sample workflow from doc
https://docs.github.com/en/actions/using-workflows/storing-workflow-data-as-artifacts.
The api design is inspired by
https://github.com/nektos/act/blob/master/pkg/artifacts/server.go and
includes some changes from gitea internal structs and methods.

Actions artifacts contains two parts:

- Gitea server api and storage (this pr implement basic design without
some complex cases supports)
- Runner communicate with gitea server api (in comming)

Old pr https://github.com/go-gitea/gitea/pull/22345 is outdated after
actions merged. I create new pr from main branch.


![897f7694-3e0f-4f7c-bb4b-9936624ead45](https://user-images.githubusercontent.com/2142787/219382371-eb3cf810-e4e0-456b-a8ff-aecc2b1a1032.jpeg)

Add artifacts list in actions workflow page.
2023-05-19 21:37:57 +08:00
Jason Song 7985cde84d
Fix Actions being enabled accidentally (#24802)
Regression of #24536. If the user doesn't explicitly disable Actions, it
will be enabled.

1. Gitea will call `loadRepositoryFrom` before `loadActionsFrom`.

25d4f95df2/modules/setting/setting.go (L234-L237)
2. In `loadRepositoryFrom`,
`rootCfg.Section("actions").Key("ENABLED").MustBool(true)` will set
`actions.ENABLED` with `true`.

25d4f95df2/modules/setting/repository.go (L313-L315)
3. In `loadActionsFrom`, `rootCfg.Section("actions")` will get a section
with Actions enabled.

25d4f95df2/modules/setting/actions.go (L23-L26)

Although the cause of the problem was using `true` by copy-paste
mistake, it also surprised me that
**`rootCfg.Section("actions").Key("ENABLED").MustBool(true)` doesn't
only read, but also write.**
2023-05-19 19:35:12 +08:00
wxiaoguang 584c0789fa
Make mailer SMTP check have timed context (#24751)
Make mailer SMTP check have timed context

Otherwise Gitea may block for long time if the DNS request blocks.

---------

Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-16 22:55:51 +02:00
KN4CK3R 5968c63a11
Add Go package registry (#24687)
Fixes #7608

This PR adds a Go package registry usable with the Go proxy protocol.

![grafik](https://github.com/go-gitea/gitea/assets/1666336/328feb5c-3df2-4f9d-8eae-fe3126d14c37)
2023-05-14 23:38:40 +08:00
wxiaoguang 82224c54e0
Improve avatar uploading / resizing / compressing, remove Fomantic card module (#24653)
Fixes: #8972
Fixes: #24263

And I think it also (partially) fix #24263 (no need to convert) ,
because users could upload any supported image format if it isn't larger
than AVATAR_MAX_ORIGIN_SIZE


The main idea: 

* if the uploaded file size is not larger than AVATAR_MAX_ORIGIN_SIZE,
use the origin
* if the resized size is larger than the origin, use the origin

Screenshots:

JPG:

<details>


![image](https://github.com/go-gitea/gitea/assets/2114189/70e98bb0-ecb9-4c4e-a89f-4a37d4e37f8e)

</details>

APNG:

<details>


![image](https://github.com/go-gitea/gitea/assets/2114189/9055135b-5e2d-4152-bd72-596fcb7c6671)


![image](https://github.com/go-gitea/gitea/assets/2114189/50364caf-f7f6-4241-a289-e485fe4cd582)

</details>

WebP (animated)

<details>


![image](https://github.com/go-gitea/gitea/assets/2114189/f642eb85-498a-49a5-86bf-0a7b04089ae0)

</details>

The only exception: if a WebP image is larger than MaxOriginSize and it
is animated, then current `webp` package can't decode it, so only in
this case it isn't supported. IMO no need to support such case: why a
user would upload a 1MB animated webp as avatar? crazy .....

---------

Co-authored-by: silverwind <me@silverwind.io>
2023-05-13 20:59:11 +02:00
KN4CK3R 9173e079ae
Add Alpine package registry (#23714)
This PR adds an Alpine package registry. You can follow [this
tutorial](https://wiki.alpinelinux.org/wiki/Creating_an_Alpine_package)
to build a *.apk package for testing.

This functionality is similar to the Debian registry (#22854) and
therefore shares some methods. I marked this PR as blocked because it
should be merged after #22854.


![grafik](https://user-images.githubusercontent.com/1666336/227779595-b76163aa-eea1-4a79-9583-775c24ad74e8.png)

---------

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-12 17:27:50 +00:00
rune 4b80813341
Support SSH for go get (#24664)
fix #12192 Support SSH for go get

---------

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: mfk <mfk@hengwei.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
2023-05-12 09:44:37 +00:00
wxiaoguang 54f399c4df
Increase default LFS auth timeout from 20m to 24h (#24628)
According to the discussion with DanielGibson, the default "20m" seems
too short. It would make LFS fail if the file is large / network is
slow.

I think relaxing this timeout doesn't have side affect. So change the
default value to 24h, IMO that should be long enough.

## ⚠️ BREAKING

If admins want the previous timeout, they should set the setting
`[server].LFS_HTTP_AUTH_EXPIRY`.
2023-05-10 22:23:47 +08:00
Lunny Xiao c355728a6f
Remove unnecessary code (#24610)
As title, remove unnecessary code.
2023-05-10 04:57:06 +00:00
wxiaoguang 6f9c278559
Rewrite queue (#24505)
# ⚠️ Breaking

Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).

If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.

Example:

```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```

Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.

# The problem

The old queue package has some legacy problems:

* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.

It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.

# The new queue package

It keeps using old config and concept as much as possible.

* It only contains two major kinds of concepts:
    * The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.

There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.

Almost ready for review.

TODO:

* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)

## Code coverage:

![image](https://user-images.githubusercontent.com/2114189/236620635-55576955-f95d-4810-b12f-879026a3afdf.png)
2023-05-08 19:49:59 +08:00
KN4CK3R 05209f0d1d
Add RPM registry (#23380)
Fixes #20751

This PR adds a RPM package registry. You can follow [this
tutorial](https://opensource.com/article/18/9/how-build-rpm-packages) to
build a *.rpm package for testing.

This functionality is similar to the Debian registry (#22854) and
therefore shares some methods. I marked this PR as blocked because it
should be merged after #22854.


![grafik](https://user-images.githubusercontent.com/1666336/223806549-d8784fd9-9d79-46a2-9ae2-f038594f636a.png)
2023-05-05 20:33:37 +00:00
sillyguodong a866cb0cb9
Fix the permission of team's Actions unit issue (#24536)
close #24449

The unit of `Actions` should be contorlled not only by
`repository.DISABLED_REPO_UNITS` but also by `actions.ENABLED`
in the `app.ini`.
Previously, the permission of the team's `Actions` unit was not
controlled by `actions.Enabled`. So, even if the user sets
`actions.Enabled` to false, he can still select the permission of the
`Actions` unit for the team.

This PR makes the permissions of the team's `Actions` unit also
controlled by `actions.Enabled`. Just append`TypeActions` into
`DisabledRepoUnits` slice when initializing if `actions.Enabled` is
false.

### Changes:

If `Actions` is set disbaled in `app.ini`, like below:
```yaml
[actions]
ENABLED = false
```

1. If user try to create/edit a team, will prompt user that `Actions` is disabled.

![image](https://user-images.githubusercontent.com/33891828/236370415-961082b2-82d2-4d9e-8025-83872ad08cbb.png)

2. `actions` is not displayed in the sidebar on the team details page

![image](https://user-images.githubusercontent.com/33891828/236371817-f39f9bc9-5926-4b88-b5e6-d93617fcfb07.png)
2023-05-05 20:02:30 +08:00
Lunny Xiao 377a0a20f0
Merge setting.InitXXX into one function with options (#24389)
This PR will merge 3 Init functions on setting packages as 1 and
introduce an options struct.
2023-05-04 11:55:35 +08:00
KN4CK3R bf999e4069
Add Debian package registry (#24426)
Co-authored-by: @awkwardbunny

This PR adds a Debian package registry.
You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing.
Source packages are not supported at the moment and I did not find
documentation of the architecture "all" and how these packages should be
treated.


![grafik](https://user-images.githubusercontent.com/1666336/218126879-eb80a866-775c-4c8e-8529-5797203a64e6.png)

Part of #20751.

Revised copy of #22854.

---------

Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-02 12:31:35 -04:00
wxiaoguang 2a56666fd2
Fix incorrect CurrentUser check for docker rootless (#24441)
The IsRunUserMatchCurrentUser logic is fragile, the "SSH" config is not
ready when it executes.
2023-04-30 14:14:57 -04:00
Yarden Shoham cc84c58aff
Remove unused setting time.FORMAT (#24430)
It's loaded and then never used.

---------

Co-authored-by: Giteabot <teabot@gitea.io>
2023-04-29 22:51:43 +02:00
Yarden Shoham c0ddec8a2a
Revert "Add Debian package registry" (#24412)
Reverts go-gitea/gitea#22854
2023-04-28 18:06:41 -04:00
KN4CK3R bf77e2163b
Add Debian package registry (#22854)
Co-authored-by: @awkwardbunny

This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.

---------

Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2023-04-28 17:51:36 -04:00
contra-bit 58caf422e6
Add .livemd as a markdown extension (#22730)
## Needs and benefits
[Livebook](https://livebook.dev/) notebooks are used for code
documentation and for deep dives and note-taking in the elixir
ecosystem. Rendering these in these as Markdown on frogejo has many
benefits, since livemd is a subset of markdown. Some of the benefits
are:
- New users of elixir and livebook are scared by unformated .livemd
files, but are shown what they expect
- Sharing a notebook is as easy as sharing a link, no need to install
the software in order to see the results.

[goldmark-meraid ](https://github.com/abhinav/goldmark-mermaid) is a
mermaid-js parser already included in gitea. This makes the .livemd
rendering integration feature complete. With this PR class diagrams, ER
Diagrams, flow charts and much more will be rendered perfectly.

With the additional functionality gitea will be an ideal tool for
sharing resources with fellow software engineers working in the elixir
ecosystem. Allowing the git forge to be used without needing to install
any software.

## Feature Description
This issue requests the .livemd extension to be added as a Markdown
language extension.

- `.livemd` is the extension of Livebook which is an Elixir version of
Jupyter Notebook.
- `.livemd` is` a subset of Markdown.

This would require the .livemd to be recognized as a markdown file. The
Goldmark the markdown parser should handle the parsing and rendering
automatically.

Here is the corresponding commit for GitHub linguist:
https://github.com/github/linguist/pull/5672

Here is a sample page of a livemd file:

https://github.com/github/linguist/blob/master/samples/Markdown/livebook.livemd

## Screenshots

The first screenshot shows how github shows the sample .livemd in the
browser.
The second screenshot shows how mermaid js, renders my development
notebook and its corresponding ER Diagram. The source code can be found
here:
79615f7428/termiNotes.livemd

## Testing
I just changed the file extension from `.livemd`to `.md`and the document
already renders perfectly on codeberg. Check you can it out
[here](https://codeberg.org/lgh/Termi/src/branch/livemd2md/termiNotes.md)

---------

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2023-04-26 11:22:54 -04:00
silverwind 517f9f5aa4
Don't set meta theme-color by default (#24340)
Fixes https://github.com/go-gitea/gitea/issues/24321. By not setting
this meta tag, Safari will use body color for chrome and out-of-viewport
areas, which looks much better then static mismatching green.

As per
[MDN](https://developer.mozilla.org/en-US/docs/Web/HTML/Element/meta/name/theme-color)
it's really only Apple browsers who still support this tag, most others
have dropped support.
2023-04-26 00:56:42 -04:00
Lunny Xiao 5cf7da63ee
Refactor config provider (#24245)
This PR introduces more abstract about `ConfigProvider` and hides more `ini` references.

---------

Co-authored-by: delvh <dev.lh@web.de>
2023-04-25 23:06:39 +08:00
wxiaoguang d44e1565da
Refactor setting.Other and remove unused SHOW_FOOTER_BRANDING (#24270)
The `SHOW_FOOTER_BRANDING` came from year 2015, and it seems nobody ever
uses it. It only shows an GitHub icon which seems unrelated to Gitea, it
doesn't do what document says. So, remove it.

## ⚠️ Breaking

Users can now remove the key `[other].SHOW_FOOTER_BRANDING` from their
app.ini.
2023-04-22 19:38:25 -04:00
wxiaoguang 94210633ae
Fix incorrect CORS default values (#24206)
Document: 

```
;ALLOW_DOMAIN = *
;METHODS = GET,HEAD,POST,PUT,PATCH,DELETE,OPTIONS
```

Co-authored-by: Giteabot <teabot@gitea.io>
2023-04-19 15:30:10 -04:00
wxiaoguang e422342eeb
Allow adding new files to an empty repo (#24164)
![image](https://user-images.githubusercontent.com/2114189/232561612-2bfcfd0a-fc04-47ba-965f-5d0bcea46c54.png)
2023-04-19 21:40:42 +08:00
wxiaoguang 5b9557aef5
Refactor cookie (#24107)
Close #24062

At the beginning, I just wanted to fix the warning mentioned by #24062

But, the cookie code really doesn't look good to me, so clean up them.

Complete the TODO on `SetCookie`: 

> TODO: Copied from gitea.com/macaron/macaron and should be improved
after macaron removed.
2023-04-13 15:45:33 -04:00
Gary Moon 29194a9dd6
Correct the access log format (#24085)
The default access log format has been unnecessarily escaped, leading to
spurious backslashes appearing in log lines.

Additionally, the `RemoteAddr` field includes the port, which breaks
most log parsers attempting to process it. I've added a call to
`net.SplitHostPort()` attempting to isolate the address alone, with a
fallback to the original address if it errs.

Signed-off-by: Gary Moon <gary@garymoon.net>
2023-04-13 21:14:06 +08:00
wxiaoguang 50a72e7a83
Use a general approach to access custom/static/builtin assets (#24022)
The idea is to use a Layered Asset File-system (modules/assetfs/layered.go)

For example: when there are 2 layers: "custom", "builtin", when access
to asset "my/page.tmpl", the Layered Asset File-system will first try to
use "custom" assets, if not found, then use "builtin" assets.

This approach will hugely simplify a lot of code, make them testable.

Other changes:

* Simplify the AssetsHandlerFunc code
* Simplify the `gitea embedded` sub-command code

---------

Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-04-12 18:16:45 +08:00
Leon Busch-George 7a8a4f5432
Prefer native parser for SSH public key parsing (#23798)
Without this patch, the setting SSH.StartBuiltinServer decides whether
the native (Go) implementation is used rather than calling 'ssh-keygen'.
It's possible for 'using ssh-keygen' and 'using the built-in server' to
be independent.
In fact, the gitea rootless container doesn't ship ssh-keygen and can be
configured to use the host's SSH server - which will cause the public
key parsing mechanism to break.

This commit changes the decision to be based on SSH.KeygenPath instead.
Any existing configurations with a custom KeygenPath set will continue
to function. The new default value of '' selects the native version. The
downside of this approach is that anyone who has relying on plain
'ssh-keygen' to have special properties will now be using the native
version instead.
I assume the exec-variant is only there because /x/crypto/ssh didn't
support ssh-ed25519 until 2016. I don't see any other reason for using
it so it might be an acceptable risk.

Fixes #23363

EDIT: this message was garbled when I tried to get the commit
description back in.. Trying to reconstruct it:

## ⚠️ BREAKING ⚠️ Users who don't have SSH.KeygenPath
explicitly set and rely on the ssh-keygen binary need to set
SSH.KeygenPath to 'ssh-keygen' in order to be able to continue using it
for public key parsing.

There was something else but I can't remember at the moment.

EDIT2: It was about `make test` and `make lint`. Can't get them to run.
To reproduce the issue, I installed `golang` in `docker.io/node:16` and
got:
```
...
go: mvdan.cc/xurls/v2@v2.4.0: unknown revision mvdan.cc/xurls/v2.4.0
go: gotest.tools/v3@v3.4.0: unknown revision gotest.tools/v3.4.0
...
go: gotest.tools/v3@v3.0.3: unknown revision gotest.tools/v3.0.3
...
go: error loading module requirements
```

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
2023-04-11 14:34:28 +08:00
wxiaoguang e57e1144c5
Add ONLY_SHOW_RELEVANT_REPOS back, fix explore page bug, make code more strict (#23766)
Follow #21962

After I eat my own dogfood, I would say that
ONLY_SHOW_RELEVANT_REPOS=false is necessary for many private/enterprise
instances, because many private repositories do not have
"description/topic", users just want to search by their names.

This PR also adds `PageIsExploreRepositories` check, to make code more
strict, because the `search` template is shared for different purpose.

And during the test, I found a bug that the "Search" button didn't
respect the "relevant" parameter, so this PR fixes the bug by the way
together.

I think this PR needs to be backported.
2023-03-29 08:41:45 -05:00
techknowlogick 92c160d8e7
Add meilisearch support (#23136)
Add meilisearch support

Fixes #20665
2023-03-28 22:23:23 -04:00
wxiaoguang 5727056ea1
Make minio package support legacy MD5 checksum (#23768)
A feedback from discord:
https://discord.com/channels/322538954119184384/561007778139734027/1090185427115319386

Some storages like:

 * https://developers.cloudflare.com/r2/api/s3/api/
 * https://www.backblaze.com/b2/docs/s3_compatible_api.html

They do not support "x-amz-checksum-algorithm" header

But minio recently uses that header with CRC32C by default. So we have
to tell minio to use legacy MD5 checksum.

I guess this needs to be backported because IIRC we 1.19 and 1.20 are
using similar minio package.


The minio package code for SendContentMD5 looks like this:

<details>

<img width="755" alt="image"
src="https://user-images.githubusercontent.com/2114189/228186768-4f2f6f67-62b9-4aee-9251-5af714ad9674.png">

</details>
2023-03-28 11:10:24 -04:00
Brecht Van Lommel 84daddc2fa
Editor preview support for external renderers (#23333)
Remove `[repository.editor] PREVIEWABLE_FILE_MODES` setting that seemed
like it was intended to support this but did not work. Instead, whenever
viewing a file shows a preview, also have a Preview tab in the file
editor.

Add new `/markup` web and API endpoints with `comment`, `gfm`,
`markdown` and new `file` mode that uses a file path to determine the
renderer.

Remove `/markdown` web endpoint but keep the API for backwards and
GitHub compatibility.

## ⚠️ BREAKING ⚠️

The `[repository.editor] PREVIEWABLE_FILE_MODES` setting was removed.
This setting served no practical purpose and was not working correctly.
Instead a preview tab is always shown in the file editor when supported.

---------

Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-03-24 14:12:23 +08:00
silverwind af3711100a
Add .patch to attachment.ALLOWED_TYPES (#23580) 2023-03-19 15:58:43 -04:00
Lunny Xiao 623a539f23
Move pidfile creation from setting to web cmd package (#23285)
Creating pid file should not belong to setting package and only web
command needs that. So this PR moves pidfile creation from setting
package to web command package to keep setting package more readable.

I marked this as `break` because the PIDFile path moved. For those who
have used the pid build argument, it has to be changed.

---------

Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2023-03-16 15:22:54 +08:00
KN4CK3R c709fa17a7
Add Swift package registry (#22404)
This PR adds a [Swift](https://www.swift.org/) package registry.


![grafik](https://user-images.githubusercontent.com/1666336/211842523-07521cbd-8fb6-400f-820c-ee8048b05ae8.png)
2023-03-13 15:28:39 -05:00
Philip Peterson 757b4c17e9
Support reflogs (#22451)
This PR adds support for reflogs on all repositories. It does this by
adding a global configuration entry.

Implements #14865

---------

Signed-off-by: Philip Peterson <philip.c.peterson@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-03-13 15:51:07 +08:00
sillyguodong 5155ec35c5
Parse external request id from request headers, and print it in access log (#22906)
Close: #22890.

---
### Configure in .ini file:
```ini
[log]
REQUEST_ID_HEADERS = X-Request-ID, X-Trace-Id
```

### Params in Request Header
```
X-Trace-ID: trace-id-1q2w3e4r
```

![image](https://user-images.githubusercontent.com/33891828/218665296-8fd19a0f-ada6-4236-8bdb-f99201c703e8.png)



### Log output:

![image](https://user-images.githubusercontent.com/33891828/218665225-cc242a57-4ffc-449a-a1f6-f45ded0ead60.png)
2023-03-10 09:54:32 -06:00
Jason Song c84238800b
Refactor setting.Database.UseXXX to methods (#23354)
Replace #23350.

Refactor `setting.Database.UseMySQL` to
`setting.Database.Type.IsMySQL()`.

To avoid mismatching between `Type` and `UseXXX`.

This refactor can fix the bug mentioned in #23350, so it should be
backported.
2023-03-07 18:51:06 +08:00
Yarden Shoham 0e7bec1849
Add InsecureSkipVerify to Minio Client for Storage (#23166)
Allows using Minio with untrusted certificates

Closes #23128

Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
2023-02-27 16:26:13 +00:00
Lunny Xiao d845be661f
handle deprecated settings (#22992)
Fix #22736
2023-02-20 16:18:26 -06:00
zeripath ef11d41639
Make CI use a dummy password hasher for all tests (#22983)
During the recent hash algorithm change it became clear that the choice
of password hash algorithm plays a role in the time taken for CI to run.

Therefore as attempt to improve CI we should consider using a dummy
hashing algorithm instead of a real hashing algorithm.

This PR creates a dummy algorithm which is then set as the default
hashing algorithm during tests that use the fixtures. This hopefully
will cause a reduction in the time it takes for CI to run.

---------

Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-02-20 13:20:30 +08:00
Lunny Xiao c53ad052d8
Refactor the setting to make unit test easier (#22405)
Some bugs caused by less unit tests in fundamental packages. This PR
refactor `setting` package so that create a unit test will be easier
than before.

- All `LoadFromXXX` files has been splited as two functions, one is
`InitProviderFromXXX` and `LoadCommonSettings`. The first functions will
only include the code to create or new a ini file. The second function
will load common settings.
- It also renames all functions in setting from `newXXXService` to
`loadXXXSetting` or `loadXXXFrom` to make the function name less
confusing.
- Move `XORMLog` to `SQLLog` because it's a better name for that.

Maybe we should finally move these `loadXXXSetting` into the `XXXInit`
function? Any idea?

---------

Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
2023-02-20 00:12:01 +08:00
zeripath 61b89747ed
Provide the ability to set password hash algorithm parameters (#22942)
This PR refactors and improves the password hashing code within gitea
and makes it possible for server administrators to set the password
hashing parameters

In addition it takes the opportunity to adjust the settings for `pbkdf2`
in order to make the hashing a little stronger.

The majority of this work was inspired by PR #14751 and I would like to
thank @boppy for their work on this.

Thanks to @gusted for the suggestion to adjust the `pbkdf2` hashing
parameters.

Close #14751

---------

Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-02-19 15:35:20 +08:00
KN4CK3R d987ac6bf1
Add Chef package registry (#22554)
This PR implements a [Chef registry](https://chef.io/) to manage
cookbooks. This package type was a bit complicated because Chef uses RSA
signed requests as authentication with the registry.


![grafik](https://user-images.githubusercontent.com/1666336/213747995-46819fd8-c3d6-45a2-afd4-a4c3c8505a4a.png)


![grafik](https://user-images.githubusercontent.com/1666336/213748145-d01c9e81-d4dd-41e3-a3cc-8241862c3166.png)

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-02-06 09:49:21 +08:00
KN4CK3R df789d962b
Add Cargo package registry (#21888)
This PR implements a [Cargo registry](https://doc.rust-lang.org/cargo/)
to manage Rust packages. This package type was a little bit more
complicated because Cargo needs an additional Git repository to store
its package index.

Screenshots:

![grafik](https://user-images.githubusercontent.com/1666336/203102004-08d812ac-c066-4969-9bda-2fed818554eb.png)

![grafik](https://user-images.githubusercontent.com/1666336/203102141-d9970f14-dca6-4174-b17a-50ba1bd79087.png)

![grafik](https://user-images.githubusercontent.com/1666336/203102244-dc05743b-78b6-4d97-998e-ef76341a978f.png)

---------

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-02-05 18:12:31 +08:00
ByLCY 7baeb9c52a
Add new captcha: cloudflare turnstile (#22369)
Added a new captcha(cloudflare turnstile) and its corresponding
document. Cloudflare turnstile official instructions are here:
https://developers.cloudflare.com/turnstile

Signed-off-by: ByLCY <bylcy@bylcy.dev>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
2023-02-05 15:29:03 +08:00
delvh 4d20a4a1ba
Remove ONLY_SHOW_RELEVANT_REPOS setting (#21962)
Every user can already disable the filter manually, so the explicit
setting is absolutely useless and only complicates the logic.

Previously, there was also unexpected behavior when multiple query
parameters were present.

---------

Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-02-04 21:26:38 +08:00
techknowlogick 2741546bed
Repositories: by default disable all units except code and pulls on forks (#22541)
Most of the time forks are used for contributing code only, so not
having
issues, projects, release and packages is a better default for such
cases.
They can still be enabled in the settings.

A new option `DEFAULT_FORK_REPO_UNITS` is added to configure the default
units on forks.

Also add missing `repo.packages` unit to documentation.

code by: @brechtvl

## ⚠️ BREAKING ⚠️ 

When forking a repository, the fork will now have issues, projects,
releases, packages and wiki disabled. These can be enabled in the
repository settings afterwards. To change back to the previous default
behavior, configure `DEFAULT_FORK_REPO_UNITS` to be the same value as
`DEFAULT_REPO_UNITS`.

Co-authored-by: Brecht Van Lommel <brecht@blender.org>
2023-02-04 14:48:38 +08:00
Yarden Shoham ce4fd95233
Use native error checking with exec.ErrDot (#22735)
This was meant to land in #22073 but was blocked until #22732 was merged

Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
2023-02-03 17:22:11 +00:00
KN4CK3R 6ba9ff7b48
Add Conda package registry (#22262)
This PR adds a [Conda](https://conda.io/) package registry.
2023-02-01 12:30:39 -06:00
Jason Song 4011821c94
Implement actions (#21937)
Close #13539.

Co-authored by: @lunny @appleboy @fuxiaohei and others.

Related projects:
- https://gitea.com/gitea/actions-proto-def
- https://gitea.com/gitea/actions-proto-go
- https://gitea.com/gitea/act
- https://gitea.com/gitea/act_runner

### Summary

The target of this PR is to bring a basic implementation of "Actions",
an internal CI/CD system of Gitea. That means even though it has been
merged, the state of the feature is **EXPERIMENTAL**, and please note
that:

- It is disabled by default;
- It shouldn't be used in a production environment currently;
- It shouldn't be used in a public Gitea instance currently;
- Breaking changes may be made before it's stable.

**Please comment on #13539 if you have any different product design
ideas**, all decisions reached there will be adopted here. But in this
PR, we don't talk about **naming, feature-creep or alternatives**.

### ⚠️ Breaking

`gitea-actions` will become a reserved user name. If a user with the
name already exists in the database, it is recommended to rename it.

### Some important reviews

- What is `DEFAULT_ACTIONS_URL` in `app.ini` for?
  - https://github.com/go-gitea/gitea/pull/21937#discussion_r1055954954
- Why the api for runners is not under the normal `/api/v1` prefix?
  - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061173592
- Why DBFS?
  - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061301178
- Why ignore events triggered by `gitea-actions` bot?
  - https://github.com/go-gitea/gitea/pull/21937#discussion_r1063254103
- Why there's no permission control for actions?
  - https://github.com/go-gitea/gitea/pull/21937#discussion_r1090229868

### What it looks like

<details>

#### Manage runners

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205870657-c72f590e-2e08-4cd4-be7f-2e0abb299bbf.png">

#### List runs

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205872794-50fde990-2b45-48c1-a178-908e4ec5b627.png">


#### View logs

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205872501-9b7b9000-9542-4991-8f55-18ccdada77c3.png">



</details>

### How to try it

<details>

#### 1. Start Gitea

Clone this branch and [install from
source](https://docs.gitea.io/en-us/install-from-source).

Add additional configurations in `app.ini` to enable Actions:

```ini
[actions]
ENABLED = true
```

Start it.

If all is well, you'll see the management page of runners:

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205877365-8e30a780-9b10-4154-b3e8-ee6c3cb35a59.png">


#### 2. Start runner

Clone the [act_runner](https://gitea.com/gitea/act_runner), and follow
the
[README](https://gitea.com/gitea/act_runner/src/branch/main/README.md)
to start it.

If all is well, you'll see a new runner has been added:

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205878000-216f5937-e696-470d-b66c-8473987d91c3.png">

#### 3. Enable actions for a repo

Create a new repo or open an existing one, check the `Actions` checkbox
in settings and submit.

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205879705-53e09208-73c0-4b3e-a123-2dcf9aba4b9c.png">
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205879383-23f3d08f-1a85-41dd-a8b3-54e2ee6453e8.png">

If all is well, you'll see a new tab "Actions":

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205881648-a8072d8c-5803-4d76-b8a8-9b2fb49516c1.png">

#### 4. Upload workflow files

Upload some workflow files to `.gitea/workflows/xxx.yaml`, you can
follow the [quickstart](https://docs.github.com/en/actions/quickstart)
of GitHub Actions. Yes, Gitea Actions is compatible with GitHub Actions
in most cases, you can use the same demo:

```yaml
name: GitHub Actions Demo
run-name: ${{ github.actor }} is testing out GitHub Actions 🚀
on: [push]
jobs:
  Explore-GitHub-Actions:
    runs-on: ubuntu-latest
    steps:
      - run: echo "🎉 The job was automatically triggered by a ${{ github.event_name }} event."
      - run: echo "🐧 This job is now running on a ${{ runner.os }} server hosted by GitHub!"
      - run: echo "🔎 The name of your branch is ${{ github.ref }} and your repository is ${{ github.repository }}."
      - name: Check out repository code
        uses: actions/checkout@v3
      - run: echo "💡 The ${{ github.repository }} repository has been cloned to the runner."
      - run: echo "🖥️ The workflow is now ready to test your code on the runner."
      - name: List files in the repository
        run: |
          ls ${{ github.workspace }}
      - run: echo "🍏 This job's status is ${{ job.status }}."
```

If all is well, you'll see a new run in `Actions` tab:

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205884473-79a874bc-171b-4aaf-acd5-0241a45c3b53.png">

#### 5. Check the logs of jobs

Click a run and you'll see the logs:

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205884800-994b0374-67f7-48ff-be9a-4c53f3141547.png">

#### 6. Go on

You can try more examples in [the
documents](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions)
of GitHub Actions, then you might find a lot of bugs.

Come on, PRs are welcome.

</details>

See also: [Feature Preview: Gitea
Actions](https://blog.gitea.io/2022/12/feature-preview-gitea-actions/)

---------

Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2023-01-31 09:45:19 +08:00
KN4CK3R fc037b4b82
Add support for incoming emails (#22056)
closes #13585
fixes #9067
fixes #2386
ref #6226
ref #6219
fixes #745

This PR adds support to process incoming emails to perform actions.
Currently I added handling of replies and unsubscribing from
issues/pulls. In contrast to #13585 the IMAP IDLE command is used
instead of polling which results (in my opinion 😉) in cleaner code.

Procedure:
- When sending an issue/pull reply email, a token is generated which is
present in the Reply-To and References header.
- IMAP IDLE waits until a new email arrives
- The token tells which action should be performed

A possible signature and/or reply gets stripped from the content.

I added a new service to the drone pipeline to test the receiving of
incoming mails. If we keep this in, we may test our outgoing emails too
in future.

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-01-14 23:57:10 +08:00
Lunny Xiao 2220e5d245
Allow HOST has no port (#22280)
Fix #22274

This PR will allow `HOST` without port. Then a default port will be
given in future steps.
2023-01-11 20:09:24 +00:00
Lunny Xiao 99a675f4a1
Don't lookup mail server when using sendmail (#22300)
Fix #22287
2023-01-09 11:09:46 -05:00
Jason Song f8e93ce423
Reminder for no more logs to console (#22282)
Even if the log mode is `file`, there are still few logs printed to the
console at the very beginning.

That's fine but confusing. Someone will think the console is the only
place to find logs, and get nothing helpful. See
https://github.com/go-gitea/gitea/issues/22274#issuecomment-1367917717.

There should be a reminder that there are no more logs to the console.

And to avoid log loss, we should add configured loggers first, then
remove console logger if there's no `console` in the mode.

Tests with `MODE = file`:

Before:
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/210079862-d591677f-347e-46ed-a548-bb2ddbb0885c.png">

After:
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/210080002-d66cc418-6888-4909-b370-d03f5986ef41.png">

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
2023-01-01 22:00:33 +08:00
Lunny Xiao 9c8fc7f677
Fix bug of DisableGravatar default value (#22296)
#18058 made a mistake. The disableGravatar's default value depends on
`OfflineMode`. If it's `true`, then `disableGravatar` is true, otherwise
it's `false`. But not opposite.

Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2023-01-01 20:19:23 +08:00