During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4)
(cherry picked from commit 639dafabec)
(cherry picked from commit d699c12ceb)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes#2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e5)
(cherry picked from commit 03989418a7)
(cherry picked from commit f50e0dfe5e)
(cherry picked from commit cad9184a36)
(cherry picked from commit e2da5d7fe1)
(cherry picked from commit 3a80534d4d)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da563)
(cherry picked from commit f7535a1cef)
(cherry picked from commit 1a90cd37c3)
(cherry picked from commit d86d71340a)
(cherry picked from commit 9e5cce1afc)
(cherry picked from commit 2013fb3fab)
(cherry picked from commit 88b9d21d11)
(cherry picked from commit 72c020298e)
(cherry picked from commit 6525f730df)
This adds a new `doctor` check: `fix-push-mirrors-without-git-remote`. The new check looks for push mirrors that do not have their remotes configured in git. If automatic fixing is enabled, it will remove these push mirrors from the database.
The check is not run by default, and thus, must be invoked manually. It should be usable in a half-migrated state, too, and as such, fixes#1800.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1853
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 9038e07ef3)
(cherry picked from commit b15bafcbc7)
(cherry picked from commit 93ba05a2dd)
(cherry picked from commit e418ea8082)
(cherry picked from commit 321790a91e)
(cherry picked from commit f4e19d3323)
(cherry picked from commit 4d9923dee8)
(cherry picked from commit 049df69eda)
Conflicts:
services/doctor/push_mirror_consistency.go
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit c79cba8d55)
(cherry picked from commit f3a3969c02)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f40)
(cherry picked from commit de8f2e03cc)
(cherry picked from commit 0182cff12e)
(cherry picked from commit 9c74254d46)
(cherry picked from commit 2f0b68f821)
(cherry picked from commit 079b995d49)
(cherry picked from commit 6952ea6ee3)
(cherry picked from commit 6c7d5a5d14)
(cherry picked from commit 49c39f0ed5)
(cherry picked from commit a8f9727388)
- Be more liberal in what Forgejo accepts, by reducing the minimum
amount of characters for SHA to 4 characters, which is the minimum
amount that Git needs in order to figure out which commit was meant.
- It's safe to reduce this requirements, as commits are passed to Git
which will error if the given commit ID results in more than one Git
object. Forgejo will catch this error as that the Commit doesn't exist,
which is a error that's already being handled in most places gracefully.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1760
(cherry picked from commit 0d655c7384)
(cherry picked from commit 9b9aca2a02)
(cherry picked from commit 0d0ab1af1f)
(cherry picked from commit d3b352c854)
(cherry picked from commit d6af2094df)
(cherry picked from commit f96e55a7a9)
(cherry picked from commit bb6261f847)
(cherry picked from commit f6a4146161)
(cherry picked from commit ed02921379)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 768377cb02)
(cherry picked from commit 2cebe3ef94)
- If you attempted to get a branch feed on a empty repository, it would
result in a panic as the code expects that the branch exists.
- `context.RepoRefByType` would normally already 404 if the branch
doesn't exist, however if a repository is empty, it would not do this
check.
- Fix bug where `/atom/branch/*` would return a RSS feed.
(cherry picked from commit d27bcd98a4)
(cherry picked from commit c58566403d)
(cherry picked from commit b8b3f6ab8b)
(cherry picked from commit 195520100b)
(cherry picked from commit 6e417087dd)
(cherry picked from commit ff91e5957a)
(cherry picked from commit 6626d5cc75)
(cherry picked from commit 62f8ab793b)
(cherry picked from commit e5bbf1a2d0)
(cherry picked from commit f5b8c8edea)
(cherry picked from commit 50948fa11b)
(cherry picked from commit 83a9f7f442)
(cherry picked from commit 679438b5d6)
(cherry picked from commit 17db07d6d0)
Signed-off-by: zareck <cassiomilczareck@gmail.com>
(cherry picked from commit f48e3ff0db)
Removing comments and make command
(cherry picked from commit 7664a423a5)
(cherry picked from commit b2fb435364)
(cherry picked from commit 0a24a819a9)
(cherry picked from commit 155cc19f75)
(cherry picked from commit 223537f71a)
(cherry picked from commit ffbe2970cc)
(cherry picked from commit 836836bd73)
(cherry picked from commit 6b66fe449d)
(cherry picked from commit a3933d9c3a)
(cherry picked from commit f1a49065f2)
(cherry picked from commit 63f4935e7d)
(cherry picked from commit a1acdd76e6)
(cherry picked from commit 7f90256804)
(cherry picked from commit 73620b0e8e)
(cherry picked from commit 587540c818)
(cherry picked from commit 434d5366ac)
(cherry picked from commit e80e193af4)
(cherry picked from commit eb9be4cee6)
(cherry picked from commit f81cfdc935)
(cherry picked from commit ba69a943cb)
(cherry picked from commit ea9bc88248)
(cherry picked from commit ba02501caf)
(cherry picked from commit 53ce632aad)
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda)
(cherry picked from commit 76dffc8621)
(cherry picked from commit ff0615b9d0)
(cherry picked from commit 8712eaa394)
(cherry picked from commit 0c11587582)
(cherry picked from commit 3cbd9fb792)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534c)
(cherry picked from commit d706d9e222)
(cherry picked from commit 6d46261a3f)
(cherry picked from commit f864d18ad3)
(cherry picked from commit 80f8620d0d)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25c)
(cherry picked from commit 63e99df3d1)
(cherry picked from commit b65d777bc7)
(cherry picked from commit 2961f4f632)
(cherry picked from commit f7f723628c)
(cherry picked from commit 9ed7915826)
(cherry picked from commit 8b9ead4608)
(cherry picked from commit 50eeaf1fbc)
(cherry picked from commit ee6f32820e)
(cherry picked from commit bf337bed35)
(cherry picked from commit 6be9501ec0)
(cherry picked from commit b39860570d)
(cherry picked from commit 3f30f486d5)
(cherry picked from commit 5680ecdbe9)
(cherry picked from commit da6a19ad16)
(cherry picked from commit 5462493a77)
(cherry picked from commit 530fe57dde)
(cherry picked from commit f174f35644)
Conflicts:
models/fixtures/repository.yml
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 75212b3a59)
(cherry picked from commit 6e3c0be555)
[FEAT] add Forgejo Git Service (squash) register a Forgejo factory
If the Forgejo factory for the Forgejo service is not registered,
newDownloader will fallback to a git service and not migrate issues
etc.
Refs: https://codeberg.org/forgejo/forgejo/issues/1678
(cherry picked from commit 51938cd161)
[FEAT] add Forgero Git Service
Signed-off-by: cassiozareck <cassiomilczareck@gmail.com>
(cherry picked from commit a878adfe62)
Adding description and Forgejo SVG
(cherry picked from commit 13738c0380)
Undo reordering and tmpl redirection
(cherry picked from commit 9ae51c46f4)
(cherry picked from commit 70fffdc61d)
(cherry picked from commit c0ebfa9da3)
(cherry picked from commit 9922c92787)
(cherry picked from commit 00c0effbc7)
(cherry picked from commit e4c9525b13)
(cherry picked from commit 09d7b83211)
(cherry picked from commit bbcd5975c9)
(cherry picked from commit 55c70a0e18)
(cherry picked from commit 76596410c0)
(cherry picked from commit 1308043931)
(cherry picked from commit 919d6aedfe)
[FEAT] add Forgero Git Service (squash) more tests
Previously only Gitea service was being tested under self-hosted migrations. Since Forgejo is also self-hosted and in fact use the same downloader/migrator we can add to this suite another test that will do the same, migrating the same repository under the same local instance but for the Forgejo service (represented by 9)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1709
Co-authored-by: zareck <cassiomilczareck@gmail.com>
Co-committed-by: zareck <cassiomilczareck@gmail.com>
(cherry picked from commit 40a4b8f1a8)
(cherry picked from commit 3198b4a642)
(cherry picked from commit 4edda1f389)
(cherry picked from commit 4d91b77d29)
(cherry picked from commit afe85c52e3)
(cherry picked from commit 5ea7df79ad)
(cherry picked from commit a667182542)
(cherry picked from commit a9bebb1e71)
(cherry picked from commit 4831a89e46)
(cherry picked from commit e02a74651f)
(cherry picked from commit 05dcef59aa)
(cherry picked from commit c8bac187f9)
(cherry picked from commit c87903a0cc)
This solves two bugs. One bug is that due to the JOIN with the
`forgejo_blocked_users` table, duplicated users were generated if a user
had more than one user blocked, this lead to receiving more than one
entry in the actions table. The other bug is that if a user blocked more
than one user, it would still receive a action entry by a
blocked user, because the SQL query would not exclude the other
duplicated users that was generated by the JOIN.
The new solution is somewhat non-optimal in my eyes, but it's better
than rewriting the query to become a potential perfomance blocker (usage
of WHERE IN, which cannot be rewritten to a JOIN). It simply removes the
watchers after it was retrieved by the SQL query.
(cherry picked from commit c63c00b39b)
(cherry picked from commit ad3cdc5705)
- Block the creation of a issue if the user is blocked by the repository owner.
- Fix integration tests (This should ideally in the future all be
self-created fixtures instead of relying on the existing ones as a small
condition can make the tests be inaccurate).
(cherry picked from commit 88d3ee333a)
(cherry picked from commit 146c82d232)
(cherry picked from commit d9dc25d038)
(cherry picked from commit cd1eadd923)
(cherry picked from commit 40a8584bbb)
- Add the ability to block a user via their profile page.
- This will unstar their repositories and visa versa.
- Blocked users cannot create issues or pull requests on your the doer's repositories (mind that this is not the case for organizations).
- Blocked users cannot comment on the doer's opened issues or pull requests.
- Blocked users cannot add reactions to doer's comments.
- Blocked users cannot cause a notification trough mentioning the doer.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/540
(cherry picked from commit 687d852480)
(cherry picked from commit 0c32a4fde5)
(cherry picked from commit 1791130e3c)
(cherry picked from commit 37858b7e8f)
(cherry picked from commit a3e2bfd7e9)
(cherry picked from commit 7009b9fe87)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
templates/user/profile.tmpl
(cherry picked from commit b2aec34791)
(cherry picked from commit e2f1b73752)
[MODERATION] organization blocking a user (#802)
- Resolves#476
- Follow up for: #540
- Ensure that the doer and blocked person cannot follow each other.
- Ensure that the block person cannot watch doer's repositories.
- Add unblock button to the blocked user list.
- Add blocked since information to the blocked user list.
- Add extra testing to moderation code.
- Blocked user will unwatch doer's owned repository upon blocking.
- Add flash messages to let the user know the block/unblock action was successful.
- Add "You haven't blocked any users" message.
- Add organization blocking a user.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/802
(cherry picked from commit 0505a10421)
(cherry picked from commit 37b4e6ef9b)
(cherry picked from commit c17c121f2c)
[MODERATION] organization blocking a user (#802) (squash)
Changes to adapt to:
6bbccdd177 Improve AJAX link and modal confirm dialog (#25210)
Refs: https://codeberg.org/forgejo/forgejo/pulls/882/files#issuecomment-945962
Refs: https://codeberg.org/forgejo/forgejo/pulls/882#issue-330561
(cherry picked from commit 523635f83c)
(cherry picked from commit 4743eaa6a0)
(cherry picked from commit eff5b43d2e)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
(cherry picked from commit 9d359be5ed)
(cherry picked from commit b1f3069a22)
[MODERATION] add user blocking API
- Follow up for: #540, #802
- Add API routes for user blocking from user and organization
perspective.
- The new routes have integration testing.
- The new model functions have unit tests.
- Actually quite boring to write and to read this pull request.
(cherry picked from commit f3afaf15c7)
(cherry picked from commit 6d754db3e5)
(cherry picked from commit 2a89ddc0ac)
(cherry picked from commit 4a147bff7e)
Conflicts:
routers/api/v1/api.go
templates/swagger/v1_json.tmpl
(cherry picked from commit bb8c339185)
(cherry picked from commit 5a11569a01)
(cherry picked from commit 2373c801ee)
[MODERATION] restore redirect on unblock
ctx.RedirectToFirst(ctx.FormString("redirect_to"), ctx.ContextUser.HomeLink())
was replaced by
ctx.JSONOK()
in 128d77a3a Following up fixes for "Fix inconsistent user profile layout across tabs" (#25739)
thus changing the behavior (nicely spotted by the tests). This
restores it.
(cherry picked from commit 597c243707)
(cherry picked from commit cfa539e590)
[MODERATION] Add test case (squash)
- Add an test case, to test an property of the function.
(cherry picked from commit 70dadb1916)
[MODERATION] Block adding collaborators
- Ensure that the doer and blocked user cannot add each other as
collaborators to repositories.
- The Web UI gets an detailed message of the specific situation, the API
gets an generic Forbidden code.
- Unit tests has been added.
- Integration testing for Web and API has been added.
- This commit doesn't introduce removing each other as collaborators on
the block action, due to the complexity of database calls that needs to
be figured out. That deserves its own commit and test code.
(cherry picked from commit 747be949a1)
[MODERATION] move locale_en-US.ini strings to avoid conflicts
Conflicts:
web_src/css/org.css
web_src/css/user.css
https://codeberg.org/forgejo/forgejo/pulls/1180
(cherry picked from commit e53f955c88)
Conflicts:
services/issue/comments.go
https://codeberg.org/forgejo/forgejo/pulls/1212
(cherry picked from commit b4a454b576)
Conflicts:
models/forgejo_migrations/migrate.go
options/locale/locale_en-US.ini
services/pull/pull.go
https://codeberg.org/forgejo/forgejo/pulls/1264
[MODERATION] Remove blocked user collaborations with doer
- When the doer blocks an user, who is also an collaborator on an
repository that the doer owns, remove that collaboration.
- Added unit tests.
- Refactor the unit test to be more organized.
(cherry picked from commit ec87016178)
(cherry picked from commit 313e6174d8)
[MODERATION] QoL improvements (squash)
- Ensure that organisations cannot be blocked. It currently has no
effect, as all blocked operations cannot be executed from an
organisation standpoint.
- Refactored the API route to make use of the `UserAssignmentAPI`
middleware.
- Make more use of `t.Run` so that the test code is more clear about
which block of code belongs to which test case.
- Added more integration testing (to ensure the organisations cannot be
blocked and some authorization/permission checks).
(cherry picked from commit e9d638d075)
[MODERATION] s/{{avatar/{{ctx.AvatarUtils.Avatar/
(cherry picked from commit ce8b30be13)
(cherry picked from commit f911dc4025)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1354
(cherry picked from commit c1b37b7fda)
(cherry picked from commit 856a2e0903)
[MODERATION] Show graceful error on comment creation
- When someone is blocked by the repository owner or issue poster and
try to comment on that issue, they get shown a graceful error.
- Adds integration test.
(cherry picked from commit 490646302e)
(cherry picked from commit d3d88667cb)
(cherry picked from commit 6818de13a9)
[MODERATION] Show graceful error on comment creation (squash) typo
(cherry picked from commit 1588d4834a)
(cherry picked from commit d510ea52d0)
(cherry picked from commit 8249e93a14)
[MODERATION] Refactor integration testing (squash)
- Motivation for this PR is that I'd noticed that a lot of repeated
calls are happening between the test functions and that certain tests
weren't using helper functions like `GetCSRF`, therefor this refactor of
the integration tests to keep it: clean, small and hopefully more
maintainable and understandable.
- There are now three integration tests: `TestBlockUser`,
`TestBlockUserFromOrganization` and `TestBlockActions` (and has been
moved in that order in the source code).
- `TestBlockUser` is for doing blocking related actions as an user and
`TestBlockUserFromOrganization` as an organisation, even though they
execute the same kind of tests they do not share any database calls or
logic and therefor it currently doesn't make sense to merge them
together (hopefully such oppurtinutiy might be presented in the future).
- `TestBlockActions` now contain all tests for actions that should be
blocked after blocking has happened, most tests now share the same doer
and blocked users and a extra fixture has been added to make this
possible for the comment test.
- Less code, more comments and more re-use between tests.
(cherry picked from commit ffb393213d)
(cherry picked from commit 85505e0f81)
(cherry picked from commit 0f3cf17761)
[MODERATION] Fix network error (squash)
- Fix network error toast messages on user actions such as follow and
unfollow. This happened because the javascript code now expects an JSON
to be returned, but this wasn't the case due to
cfa539e590127b4953b010fba3dea21c82a1714.
- The integration testing has been adjusted to instead test for the
returned flash cookie.
(cherry picked from commit 112bc25e54)
(cherry picked from commit 1194fe4899)
(cherry picked from commit 9abb95a844)
[MODERATION] Modernize frontend (squash)
- Unify blocked users list.
- Use the new flex list classes for blocked users list to avoid using
the CSS helper classes and thereby be consistent in the design.
- Fix the modal by using the new modal class.
- Remove the icon in the modal as looks too big in the new design.
- Fix avatar not displaying as it was passing the context where the user
should've been passed.
- Don't use italics for 'Blocked since' text.
- Use namelink template to display the user's name and homelink.
(cherry picked from commit ec935a16a3)
(cherry picked from commit 67f37c8346)
Conflicts:
models/user/follow.go
models/user/user_test.go
routers/api/v1/user/follower.go
routers/web/shared/user/header.go
routers/web/user/profile.go
templates/swagger/v1_json.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1468
(cherry picked from commit 6a9626839c)
Conflicts:
tests/integration/api_nodeinfo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508#issuecomment-1242385
(cherry picked from commit 7378b251b4)
Conflicts:
models/fixtures/watch.yml
models/issues/reaction.go
models/issues/reaction_test.go
routers/api/v1/repo/issue_reaction.go
routers/web/repo/issue.go
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1547
(cherry picked from commit c2028930c1)
(cherry picked from commit d3f9134aee)
(cherry picked from commit 7afe154c5c)
(cherry picked from commit 99ac7353eb)
(cherry picked from commit a9cde00c5c)
Conflicts:
services/user/delete.go
https://codeberg.org/forgejo/forgejo/pulls/1736
(cherry picked from commit 008c0cc63d)
[DEADCODE] add exceptions
(cherry picked from commit 12ddd2b10e)
[MODERATION] Remove deadcode (squash)
- Remove deadcode that's no longer used by Forgejo.
(cherry picked from commit 0faeab4fa9)
[MODERATION] Add repo transfers to blocked functionality (squash)
- When someone gets blocked, remove all pending repository transfers
from the blocked user to the doer.
- Do not allow to start transferring repositories to the doer as blocked user.
- Added unit testing.
- Added integration testing.
(cherry picked from commit 8a3caac330)
(cherry picked from commit a92b4cfeb6)
(cherry picked from commit acaaaf07d9)
(cherry picked from commit 735818863c)
(cherry picked from commit f50fa43b32)
(cherry picked from commit e166836433)
(cherry picked from commit 82a0e4a381)
(cherry picked from commit ff233c19c4)
(cherry picked from commit 8ad87d215f)
[MODERATION] Fix unblock action (squash)
- Pass the whole context instead of only giving pieces.
- This fixes CSRF not correctly being inserted into the unblock buttons.
(cherry picked from commit 2aa51922ba)
(cherry picked from commit 7ee8db0f01)
(cherry picked from commit e4f8b999bc)
(cherry picked from commit 05aea60b13)
(cherry picked from commit dc0d61b012)
(cherry picked from commit f53fa583de)
(cherry picked from commit c65b89a58d)
(cherry picked from commit 69e50b9969)
(cherry picked from commit ec127440b8)
[MODERATION] cope with shared fixtures
* There is one more issue in the fixtures and this breaks some tests
* The users in the shared fixtures were renamed for clarity and that
breaks some tests
(cherry picked from commit 707a4edbdf)
Conflicts:
modules/indexer/issues/indexer_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 82cc044366)
(cherry picked from commit 2776aec7e8)
(cherry picked from commit 1fbde36dc7)
(cherry picked from commit 1293db3c4e)
(cherry picked from commit 6476802175)
(cherry picked from commit 5740f2fc83)
(cherry picked from commit afc12d7b6e)
[MODERATION] Fix transfer confirmation (squash)
- Fix problem caused by the clearer confirmation for dangerous actions commit.
(cherry picked from commit 3488f4a9cb)
(cherry picked from commit ed7de91f6a)
(cherry picked from commit 2d97929b9b)
(cherry picked from commit 50d035a7b0)
(cherry picked from commit 0a0c07d78a)
(cherry picked from commit 85e55c4dbc)
(cherry picked from commit d8282122ad)
(cherry picked from commit 3f0b3b6cc5)
[MODERATION] Purge issues on user deletion (squash)
(cherry picked from commit 4f529d9596)
(cherry picked from commit f0e3acadd3)
(cherry picked from commit 682c4effe6)
(cherry picked from commit e43c2d84fd)
(cherry picked from commit 9c8e53ccc7)
(cherry picked from commit a9eb7ac783)
[MODERATION] Purge issues on user deletion (squash) revert shared fixtures workarounds
(cherry picked from commit 7224653a40)
(cherry picked from commit aa6e8672f9)
(cherry picked from commit 58c7947e95)
(cherry picked from commit f1aacb1851)
(cherry picked from commit 0bf174af87)
(cherry picked from commit f9706f4335)
[MODERATION] Prepare moderation for context locale changes (squash)
- Resolves https://codeberg.org/forgejo/forgejo/issues/1711
(cherry picked from commit 2e289baea9)
(cherry picked from commit 97b16bc19a)
[MODERATION] User blocking (squash) do not use shared fixture
It conflicts with a fixtured added in the commit
Fix comment permissions (#28213) (#28216)
(cherry picked from commit ab40799dcab24e9f495d765268b791931da81684)
(cherry picked from commit 996c92cafd)
(cherry picked from commit 259912e3a6)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1921
(cherry picked from commit 1e82abc032)
(cherry picked from commit a176fee160)
(cherry picked from commit 0480b76dfe)
(cherry picked from commit 4bc06b7b38)
(cherry picked from commit 073094cf72)
(cherry picked from commit ac6201c647)
(cherry picked from commit 7e0812674d)
(cherry picked from commit 068c741e56)
Conflicts:
models/repo_transfer.go
models/repo_transfer_test.go
routers/web/user/profile.go
https://codeberg.org/forgejo/forgejo/pulls/2298
- Forgejo has the option to delete users, in which all data except
issues and comments are removed, this makes sense in some cases where
users need to be removed cleanly but without removing their existing bug
reports or comments to an discussion. In the case of spammers, admins
have the option to enable purging, where comments are removed.
- Add issues to the list of things to be removed if purge is checked.
- No unit testing, as this gigantic function doesn't have one to begin
with.
- Add integration test.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1268
(cherry picked from commit 3ed381c758)
(cherry picked from commit 44d00650ce)
(cherry picked from commit 7f4da82779)
(cherry picked from commit d629314def)
Conflicts:
models/fixtures/issue.yml
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 794dcc218f)
(cherry picked from commit c433f2ecb6)
(cherry picked from commit bb23683f4b)
(cherry picked from commit 634c5604d4)
(cherry picked from commit 219073f5c5)
(cherry picked from commit 32893dbab1)
(cherry picked from commit 0ef40cfb5a)
(cherry picked from commit e535409cab3c276fd8db6b402f85934ef5127491)
(cherry picked from commit 29059f611b)
(cherry picked from commit cd480c5b8b)
(cherry picked from commit 340e657392)
(cherry picked from commit 3a7a5564d0)
(cherry picked from commit 1dbcaca726)
(cherry picked from commit c491c439e2)
(cherry picked from commit c8fe2140cc)
(cherry picked from commit c72564e3ee)
(cherry picked from commit 2084f3fa11)
(cherry picked from commit 918e65327d)
Refs: https://codeberg.org/forgejo/forgejo/pulls/2222
(cherry picked from commit 5f837efc15)
fix: write xml header
(cherry picked from commit a715984a42)
fix: optional elements and xml schema
(cherry picked from commit 6ea6895a36)
fix: pass all other requests to file search
(cherry picked from commit 9bfc74833a)
test: add integration test
(cherry picked from commit b798f4ce86)
fix: use xmlResponse
(cherry picked from commit 7f76df0b24)
(cherry picked from commit e18d574ca4)
[GITEA] Fix cancelled migration deletion modal
- https://codeberg.org/forgejo/forgejo/pulls/1473 made that dangerous
actions such as deletion also would need to type in the owner's name.
This was apparently not reflected to the deletion modal for migrations
that failed or were cancelled.
(cherry picked from commit c38dbd6f88)
(cherry picked from commit 7c07592d01)
(cherry picked from commit 78637af2b6)
[SHARED] make confirmation clearer for dangerous actions
- Currently the confirmation for dangerous actions such as transferring
the repository or deleting it only requires the user to ~~copy paste~~
type the repository name.
- This can be problematic when the user has a fork or another repository
with the same name as an organization's repository, and the confirmation
doesn't make clear that it could be deleting the wrong repository. While
it's mentioned in the dialog, it's better to be on the safe side and
also add the owner's name to be an element that has to be typed for
these dangerous actions.
- Added integration tests.
(cherry picked from commit bf679b24dd)
(cherry picked from commit 1963085dd9)
(cherry picked from commit fb94095d19)
(cherry picked from commit e1d1e46afe)
(cherry picked from commit 93993029e4)
(cherry picked from commit df3b058179)
(cherry picked from commit 8ccc6b9cba)
(cherry picked from commit 9fbe28fca3)
(cherry picked from commit 4ef2be6dc7)
https://codeberg.org/forgejo/forgejo/pulls/1873
Moved test from repo_test.go to forgejo_confirmation_repo_test.go to
avoid conflicts.
(cherry picked from commit 83cae67aa3)
(cherry picked from commit 447009ff56)
(cherry picked from commit 72c0a6150a)
(cherry picked from commit 8ee9c070b9)
(cherry picked from commit 89aba06403)
(cherry picked from commit 798407599f)
(cherry picked from commit 41c9a2606b)
(cherry picked from commit a57b214e36)
(cherry picked from commit fd287a9134)
- This is a 'front-port' of the already existing patch on v1.21 and
v1.20, but applied on top of what Gitea has done to rework the LTA
mechanism. Forgejo will stick with the reworked mechanism by the Forgejo
Security team for the time being. The removal of legacy code (AES-GCM) has been
left out.
- The current architecture is inherently insecure, because you can
construct the 'secret' cookie value with values that are available in
the database. Thus provides zero protection when a database is
dumped/leaked.
- This patch implements a new architecture that's inspired from: [Paragonie Initiative](https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies).
- Integration testing is added to ensure the new mechanism works.
- Removes a setting, because it's not used anymore.
(cherry picked from commit e3d6622a63)
(cherry picked from commit fef1a6dac5)
(cherry picked from commit b0c5165145)
(cherry picked from commit 7ad51b9f8d)
(cherry picked from commit 64f053f383)
(cherry picked from commit f5e78e4c20)
Conflicts:
services/auth/auth_token_test.go
https://codeberg.org/forgejo/forgejo/pulls/2069
(cherry picked from commit f69fc23d4b)
(cherry picked from commit d955ab3ab0)
(cherry picked from commit 9220088f90)
(cherry picked from commit c73ac63696)
(cherry picked from commit 747a176048)
Conflicts:
models/user/user.go
routers/web/user/setting/account.go
https://codeberg.org/forgejo/forgejo/pulls/2295
This field adds the possibility to set the update date when modifying
an issue through the API.
A 'NoAutoDate' in-memory field is added in the Issue struct.
If the update_at field is set, NoAutoDate is set to true and the
Issue's UpdatedUnix field is filled.
That information is passed down to the functions that actually updates
the database, which have been modified to not auto update dates if
requested.
A guard is added to the 'EditIssue' API call, to checks that the
udpate_at date is between the issue's creation date and the current
date (to avoid 'malicious' changes). It also limits the new feature
to project's owners and admins.
(cherry picked from commit c524d33402)
Add a SetIssueUpdateDate() function in services/issue.go
That function is used by some API calls to set the NoAutoDate and
UpdatedUnix fields of an Issue if an updated_at date is provided.
(cherry picked from commit f061caa655)
Add an updated_at field to the API calls related to Issue's Labels.
The update date is applied to the issue's comment created to inform
about the modification of the issue's labels.
(cherry picked from commit ea36cf80f5)
Add an updated_at field to the API call for issue's attachment creation
The update date is applied to the issue's comment created to inform
about the modification of the issue's content, and is set as the
asset creation date.
(cherry picked from commit 96150971ca)
Checking Issue changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPIEditIssueWithAutoDate
- TestAPIEditIssueWithNoAutoDate
- TestAPIAddIssueLabelsWithAutoDate
- TestAPIAddIssueLabelsWithNoAutoDate
- TestAPICreateIssueAttachmentWithAutoDate
- TestAPICreateIssueAttachmentWithNoAutoDate
(cherry picked from commit 4926a5d7a2)
Add an updated_at field to the API call for issue's comment creation
The update date is used as the comment creation date, and is applied to
the issue as the update creation date.
(cherry picked from commit 76c8faecdc)
Add an updated_at field to the API call for issue's comment edition
The update date is used as the comment update date, and is applied to
the issue as an update date.
(cherry picked from commit cf787ad7fd)
Add an updated_at field to the API call for comment's attachment creation
The update date is applied to the comment, and is set as the asset
creation date.
(cherry picked from commit 1e4ff424d3)
Checking Comment changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPICreateCommentWithAutoDate
- TestAPICreateCommentWithNoAutoDate
- TestAPIEditCommentWithAutoDate
- TestAPIEditCommentWithNoAutoDate
- TestAPICreateCommentAttachmentWithAutoDate
- TestAPICreateCommentAttachmentWithNoAutoDate
(cherry picked from commit da932152f1)
Pettier code to set the update time of comments
Now uses sess.AllCols().NoAutoToime().SetExpr("updated_unix", ...)
XORM is smart enough to compose one single SQL UPDATE which all
columns + updated_unix.
(cherry picked from commit 1f6a42808d)
Issue edition: Keep the max of the milestone and issue update dates.
When editing an issue via the API, an updated_at date can be provided.
If the EditIssue call changes the issue's milestone, the milestone's
update date is to be changed accordingly, but only with a greater
value.
This ensures that a milestone's update date is the max of all issue's
update dates.
(cherry picked from commit 8f22ea182e)
Rewrite the 'AutoDate' tests using subtests
Also add a test to check the permissions to set a date, and a test
to check update dates on milestones.
The tests related to 'AutoDate' are:
- TestAPIEditIssueAutoDate
- TestAPIAddIssueLabelsAutoDate
- TestAPIEditIssueMilestoneAutoDate
- TestAPICreateIssueAttachmentAutoDate
- TestAPICreateCommentAutoDate
- TestAPIEditCommentWithDate
- TestAPICreateCommentAttachmentAutoDate
(cherry picked from commit 961fd13c55)
(cherry picked from commit d52f4eea44)
(cherry picked from commit 3540ea2a43)
Conflicts:
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1415
(cherry picked from commit 56720ade00)
Conflicts:
routers/api/v1/repo/issue_label.go
https://codeberg.org/forgejo/forgejo/pulls/1462
(cherry picked from commit 47c78927d6)
(cherry picked from commit 2030f3b965)
(cherry picked from commit f02aeb7698)
Conflicts:
routers/api/v1/repo/issue_attachment.go
routers/api/v1/repo/issue_comment_attachment.go
https://codeberg.org/forgejo/forgejo/pulls/1575
(cherry picked from commit d072525b35)
(cherry picked from commit 8424d0ab3d)
(cherry picked from commit 5cc62caec7)
(cherry picked from commit d6300d5dcd)
[FEAT] allow setting the update date on issues and comments (squash) apply the 'update_at' value to the cross-ref comments (#1676)
[this is a follow-up to PR #764]
When a comment of issue A referencing issue B is added with a forced 'updated_at' date, that date has to be applied to the comment created in issue B.
-----
Comment:
While trying my 'RoundUp migration script', I found that this case was forgotten in PR #764 - my apologies...
I'll try to write a functional test, base on models/issues/issue_xref_test.go
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1676
Co-authored-by: fluzz <fluzz@freedroid.org>
Co-committed-by: fluzz <fluzz@freedroid.org>
(cherry picked from commit ac4f727f63)
(cherry picked from commit 5110476ee9)
(cherry picked from commit 77ba6be1da)
(cherry picked from commit 9c8337b5c4)
(cherry picked from commit 1d689eb686)
(cherry picked from commit 511c519c87)
(cherry picked from commit 2f0b4a8f61)
(cherry picked from commit fdd4da111c)
[FEAT] allow setting the update date on issues and comments (squash) do not use token= query param
See https://codeberg.org/forgejo/forgejo/commit/33439b733a
(cherry picked from commit c5139a75b9)
(cherry picked from commit c7b572c35d)
(cherry picked from commit aec7503ff6)
(cherry picked from commit 87c65f2a49)
(cherry picked from commit bd47ee33c2)
(cherry picked from commit f3dbd90a74)
The tests at tests/integration/migration-test/migration_test.go will
not run any Forgejo migration when using the gitea-*.sql.gz files
because they do not contain a ForgejoVersion row which is interpreted
as a new Forgejo installation for which there is no need for migration.
Create a situation by which the ForgejoVersion table exists and has a
version of 0 in tests/integration/migration-test/forgejo-v1.19.0.*.sql.gz
thus ensuring all Forgejo migrations are run.
The forgejo*.sql.gz files do not have any Gitea related records, which
will be interpreted by the Gitea migrations as a new installation that
does not need any migration. As a consequence the migration tests run
when using forgejo-v1.19.0.*.sql.gz are exclusively about Forgejo
migrations.
(cherry picked from commit ec8003859c)
(cherry picked from commit 697570ff39)
(cherry picked from commit f041aec172)
(cherry picked from commit 60463e3bab)
(cherry picked from commit b2fc2a7c13)
(cherry picked from commit fb2759b6af)
(cherry picked from commit 37cfc3b227)
(cherry picked from commit 832607500a)
(cherry picked from commit 143d4007b1)
(cherry picked from commit a17e803fbf)
(cherry picked from commit 72ffd49bc3)
(cherry picked from commit 9b92a5fd72)
(cherry picked from commit 0a334d0a9b)
(cherry picked from commit 3add683c94)
(cherry picked from commit 8ed3f3f86b)
(cherry picked from commit 97dc65852b)
(cherry picked from commit e0503cbfea)
(cherry picked from commit f25e6a196b)
(cherry picked from commit cca19c7a4e)
(cherry picked from commit 2c89d7f18c)
(cherry picked from commit 4eb8695c40)
(cherry picked from commit e4c42a68ff)
(cherry picked from commit f76d5e0a82)
(cherry picked from commit c6e5a2962c)
(cherry picked from commit f9927a2253)
It does not pollute the output because they go to sqlite-log/gitea.log
and it may provide clues for debugging. When trying to figure out a
problem in production, Debug is likely to be used but in a development
environment a very fine grain log is the most useful. If that's really
too much noise, the lines can be trimmed by removing all those with [T].
(cherry picked from commit 666b02eb9d)
(cherry picked from commit b69e4d3058)
(cherry picked from commit 0c1aecd7ec)
(cherry picked from commit 0304e41345)
(cherry picked from commit 4bcc7e02ce)
(cherry picked from commit 98364235f2)
(cherry picked from commit ca465e97c1)
(cherry picked from commit 653045ade1)
(cherry picked from commit 9ca2e644ab)
(cherry picked from commit 47c8a05b37)
(cherry picked from commit 4235d929ed)
(cherry picked from commit 10541c4b1c)
(cherry picked from commit c1a0e1eb2f)
(cherry picked from commit 1c20bf30b2)
(cherry picked from commit d4b372db31)
(cherry picked from commit fe3e434299)
(cherry picked from commit d2b544847f)
(cherry picked from commit 059f067a98)
(cherry picked from commit 72ad3d7d7e)
(cherry picked from commit 6037e9a273)
(cherry picked from commit d63aee6921)
(cherry picked from commit 7a0d05f802)
(cherry picked from commit 9b9965b269)
(cherry picked from commit 5ca35d9753)
(cherry picked from commit 9b003f0a0e)
(cherry picked from commit d3769a6cdc)
(cherry picked from commit b84f38e71c)
(cherry picked from commit 85e687e551)
(cherry picked from commit e11dcc60f2)
use backticks to avoid backslash
(cherry picked from commit 34212791ee)
(cherry picked from commit bde9473c69)
(cherry picked from commit d4deb43084)
(cherry picked from commit 08e91649b0)
(cherry picked from commit 2b988e5415)
[TESTS] auth LinkAccount test coverage (squash)
(cherry picked from commit a2b2e3066b)
(cherry picked from commit 841d1b5073)
(cherry picked from commit 35da630ad8)
(cherry picked from commit caf2dc4fa7)
(cherry picked from commit 6eb81e67ba)
(cherry picked from commit d59757239f)
(cherry picked from commit 38a121b688)
(cherry picked from commit 20613874ee)
(cherry picked from commit 6d2705e108)
(cherry picked from commit f177b72814)
(cherry picked from commit 75e1fc4c83)
(cherry picked from commit ba64fa9867)
(cherry picked from commit 0b8ab0893e)
(cherry picked from commit 1419d11435)
(cherry picked from commit 38766847e0)
(cherry picked from commit 6f23426a6a)
(cherry picked from commit 9e0ff9ca54)
(cherry picked from commit 353f3601c3)
(cherry picked from commit 6e4ae401d8)
(cherry picked from commit 1a7afe4153)
(cherry picked from commit f9f3e0cc02)
(cherry picked from commit 22fd0337f3)
(cherry picked from commit ee57e138d1)
(cherry picked from commit 21f9b7e73d)
(cherry picked from commit 17c548c092)
(cherry picked from commit 02d3186517)
(cherry picked from commit f02a040fa2)
(cherry picked from commit 3cf9f82b28)
(cherry picked from commit aa9d06dbac)
(cherry picked from commit 6894213154)
(cherry picked from commit c1d14c5fff)
(cherry picked from commit e0e8aabc98)
(cherry picked from commit 392a415070)
(cherry picked from commit c7cf1307ca)
(cherry picked from commit 93b13d092b)
[TESTS] createUser via the user model helper for integration tests (squash)
(cherry picked from commit 6ff2383952)
(cherry picked from commit de2a6fe8c3)
(cherry picked from commit 398a6ab072)
(cherry picked from commit 16abc89780)
(cherry picked from commit 312a3ec5d9)
(cherry picked from commit 85c6d8e290)
(cherry picked from commit 79150d30a4)
(cherry picked from commit 436137962d)
(cherry picked from commit e4eb8d471e)
(cherry picked from commit a7257052f4)
(cherry picked from commit d5eba9a6dd)
(cherry picked from commit d89ef2ffa9)
(cherry picked from commit f1d25aa307)
(cherry picked from commit 60c7c07353)
(cherry picked from commit cfeff3afdb)
(cherry picked from commit 608ac6bd68)
(cherry picked from commit c64e530a13)
(cherry picked from commit 513db02971)
(cherry picked from commit 43eaaa5a61)
(cherry picked from commit 678eb49440)
(cherry picked from commit f7458dabda)
(cherry picked from commit 32568e43b4)
(cherry picked from commit 3fcbb2043d)
(cherry picked from commit 95f0b8eefa)
(cherry picked from commit f285b9469d)
(cherry picked from commit 4b8a02ad08)
(cherry picked from commit 70eb98025b)
(cherry picked from commit dc2d448705)
(cherry picked from commit e1402ca319)
(cherry picked from commit 807d587285)
(cherry picked from commit 20b5669269)
(cherry picked from commit 1574643a6a)
Update semantic version according to specification
(cherry picked from commit 22510f4130)
Mise à jour de 'Makefile'
(cherry picked from commit c3d85d8409)
(cherry picked from commit 5ea2309851)
(cherry picked from commit ec5217b9d1)
(cherry picked from commit 14f08e364b)
(cherry picked from commit b4465c67b8)
[API] [SEMVER] replace number with version
(cherry picked from commit fba48e6497)
(cherry picked from commit 532ec5d878)
[API] [SEMVER] [v1.20] less is replaced by css
(cherry picked from commit 01ca3a4f42)
(cherry picked from commit 1d928c3ab2)
(cherry picked from commit a39dc804cd)
Conflicts:
webpack.config.js
(cherry picked from commit adc68578b3)
(cherry picked from commit 9b8d98475f)
(cherry picked from commit 2516103974)
(cherry picked from commit 18e6287963)
(cherry picked from commit e9694e67ab)
(cherry picked from commit a9763edaf0)
(cherry picked from commit e2b550f4fb)
(cherry picked from commit 2edac36701)
[API] Forgejo API /api/forgejo/v1 (squash)
Update semver as v1.20 is entering release candidate mode
(cherry picked from commit 4995098ec3)
(cherry picked from commit 578ccfdd27)
(cherry picked from commit 1bf6ac0952)
(cherry picked from commit 2fe16b2bfe)
(cherry picked from commit 7cd9d027ee)
(cherry picked from commit eaed4be2ae)
(cherry picked from commit cc94f3115f)
(cherry picked from commit d7a77e35cc)
(cherry picked from commit cd8eb68ab7)
(cherry picked from commit 68487ac95f)
(cherry picked from commit 616dceb565)
(cherry picked from commit 545fe5975b)
(cherry picked from commit c042cf8eda)
(cherry picked from commit ae5e5a7468)
(cherry picked from commit 8034ef5fa2)
(cherry picked from commit aaf0293034)
(cherry picked from commit daafa8ce58)
(cherry picked from commit 7ca3681d3e)
(cherry picked from commit 39f72cba71)
(cherry picked from commit 60a5917130)
(cherry picked from commit 4853bd9e16)
[API] Move forgejo api file (squash)
- Move the file to accommodate faa28b5a44
(cherry picked from commit bce89351d2)
(cherry picked from commit 11ae7f6e85)
(cherry picked from commit 25e96cfcb2)
(cherry picked from commit 6d8d19b391)
(cherry picked from commit 5afc5c454b)
(cherry picked from commit 86d07b4c24)
(cherry picked from commit e54d869fda)
(cherry picked from commit ab31ef1bba)
(cherry picked from commit 511cbca2f3)
(cherry picked from commit 333916fea8)
(cherry picked from commit 3802bcd7c9)
(cherry picked from commit 5d0fa034f7)
(cherry picked from commit d15627aa0d)
(cherry picked from commit ba0b21b930)
(cherry picked from commit 39ade66aac)
There is no need to specify it again. It is misleading, lets just not
do that.
(cherry picked from commit 19259fc6af)
(cherry picked from commit ca1a0256b4)
(cherry picked from commit a1381d9146fba42cb97d72d38525fa3e721bfb03)
(cherry picked from commit 74714e0246)
(cherry picked from commit 7749dbfe66)
(cherry picked from commit 4379249711)
(cherry picked from commit a69f55bebf)
(cherry picked from commit 24dd5fbfdb)
(cherry picked from commit dda856d6b8)
(cherry picked from commit bc14f4fa97)
(cherry picked from commit 78fef4f137)
(cherry picked from commit 69e013cc51)
(cherry picked from commit f173c6a273)
(cherry picked from commit 92f9d02547)
(cherry picked from commit c99d51e665)
(cherry picked from commit aa0650fd2b)
(cherry picked from commit 0a8ef91302)
(cherry picked from commit 7b54fe01c2)
(cherry picked from commit 0e154f366f)
(cherry picked from commit 02d88ee16d)
(cherry picked from commit 411924e017)
(cherry picked from commit f4e9ca6db5)
(cherry picked from commit cd80126a23)
(cherry picked from commit da626702f9)
(cherry picked from commit 4b81d0bd04)
(cherry picked from commit 53ac260669)
(cherry picked from commit 984081f08d)
(cherry picked from commit 1c39bae3ec)
Fixes#28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
Git 2.43.0 will not detect a git repository as valid without refs/
subdirectory present. `git gc` cleans this up and puts it in
packed-refs. We must keep refs/ non-empty.
Fix `Uploaded artifacts should be overwritten`
https://github.com/go-gitea/gitea/issues/28549
When upload different content to uploaded artifact, it checks that
content size is not match in db record with previous artifact size, then
the new artifact is refused.
Now if it finds uploading content size is not matching db record when
receiving chunks, it updates db records to follow the latest size value.
Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes#27062Fixes#18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
Fixes#22236
---
Error occurring currently while trying to revert commit using read-tree
-m approach:
> 2022/12/26 16:04:43 ...rvices/pull/patch.go:240:AttemptThreeWayMerge()
[E] [63a9c61a] Unable to run read-tree -m! Error: exit status 128 -
fatal: this operation must be run in a work tree
> - fatal: this operation must be run in a work tree
We need to clone a non-bare repository for `git read-tree -m` to work.
bb371aee6e
adds support to create a non-bare cloned temporary upload repository.
After cloning a non-bare temporary upload repository, we [set default
index](https://github.com/go-gitea/gitea/blob/main/services/repository/files/cherry_pick.go#L37)
(`git read-tree HEAD`).
This operation ends up resetting the git index file (see investigation
details below), due to which, we need to call `git update-index
--refresh` afterward.
Here's the diff of the index file before and after we execute
SetDefaultIndex: https://www.diffchecker.com/hyOP3eJy/
Notice the **ctime**, **mtime** are set to 0 after SetDefaultIndex.
You can reproduce the same behavior using these steps:
```bash
$ git clone https://try.gitea.io/me-heer/test.git -s -b main
$ cd test
$ git read-tree HEAD
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
error: Entry '1' not uptodate. Cannot merge.
```
After which, we can fix like this:
```
$ git update-index --refresh
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
```
Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
![grafik](https://github.com/go-gitea/gitea/assets/1666336/109ae422-496d-4200-b52e-b3a528f553e5)
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Make use of the `form-fetch-action` for the merge button, which will
automatically prevent the action from happening multiple times and show
a nice loading indicator as user feedback while the merge request is
being processed by the server.
- Adjust the merge PR code to JSON response as this is required for the
`form-fetch-action` functionality.
- Resolves https://codeberg.org/forgejo/forgejo/issues/774
- Likely resolves the cause of
https://codeberg.org/forgejo/forgejo/issues/1688#issuecomment-1313044
(cherry picked from commit 4ec64c19507caefff7ddaad722b1b5792b97cc5a)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix#28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
Gitea prefers to use relative URLs in code (to make multiple domain work
for some users)
So it needs to use `toAbsoluteUrl` to generate a full URL when click
"Reference in New Issues"
And add some comments in the test code
In #26851, it assumed that `Commit` always exists when
`PageIsDiff==true`.
But for a 404 page, the `Commit` doesn't exist, so the following code
would cause panic because nil value can't be passed as string parameter
to `IsMultilineCommitMessage(string)` (or the StringUtils.Cut in later
PRs)
Fix https://github.com/go-gitea/gitea/pull/28547#issuecomment-1867740842
Since https://gitea.com/xorm/xorm/pulls/2383 merged, xorm now supports
UPDATE JOIN.
To keep consistent from different databases, xorm use
`engine.Join().Update`, but the actural generated SQL are different
between different databases.
For MySQL, it's `UPDATE talbe1 JOIN table2 ON join_conditions SET xxx
Where xxx`.
For MSSQL, it's `UPDATE table1 SET xxx FROM TABLE1, TABLE2 WHERE
join_conditions`.
For SQLITE per https://www.sqlite.org/lang_update.html, sqlite support
`UPDATE table1 SET xxx FROM table2 WHERE join conditions` from
3.33.0(2020-8-14).
POSTGRES is the same as SQLITE.
#28361 introduced `syncBranchToDB` in `CreateNewBranchFromCommit`. This
PR will revert the change because it's unnecessary. Every push will
already be checked by `syncBranchToDB`.
This PR also created a test to ensure it's right.
This is a regression from #28220 .
`builder.Cond` will not add `` ` `` automatically but xorm method
`Get/Find` adds `` ` ``.
This PR also adds tests to prevent the method from being implemented
incorrectly. The tests are added in `integrations` to test every
database.
Introduce the new generic deletion methods
- `func DeleteByID[T any](ctx context.Context, id int64) (int64, error)`
- `func DeleteByIDs[T any](ctx context.Context, ids ...int64) error`
- `func Delete[T any](ctx context.Context, opts FindOptions) (int64,
error)`
So, we no longer need any specific deletion method and can just use
the generic ones instead.
Replacement of #28450Closes#28450
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix#28515Fix#27642Fix#17098
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
System users (Ghost, ActionsUser, etc) have a negative id and may be the
author of a comment, either because it was created by a now deleted user
or via an action using a transient token.
The GetPossibleUserByID function has special cases related to system
users and will not fail if given a negative id.
Refs: https://codeberg.org/forgejo/forgejo/issues/1425
(cherry picked from commit 6a2d2fa243)
Fixes#27819
We have support for two factor logins with the normal web login and with
basic auth. For basic auth the two factor check was implemented at three
different places and you need to know that this check is necessary. This
PR moves the check into the basic auth itself.
Fixes#27598
In #27080, the logic for the tokens endpoints were updated to allow
admins to create and view tokens in other accounts. However, the same
functionality was not added to the DELETE endpoint. This PR makes the
DELETE endpoint function the same as the other token endpoints and adds unit tests
Closes#27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
- Currently in the cron tasks, the 'Previous Time' only displays the
previous time of when the cron library executes the function, but not
any of the manual executions of the task.
- Store the last run's time in memory in the Task struct and use that,
when that time is later than time that the cron library has executed
this task.
- This ensures that if an instance admin manually starts a task, there's
feedback that this task is/has been run, because the task might be run
that quick, that the status icon already has been changed to an
checkmark,
- Tasks that are executed at startup now reflect this as well, as the
time of the execution of that task on startup is now being shown as
'Previous Time'.
- Added integration tests for the API part, which is easier to test
because querying the HTML table of cron tasks is non-trivial.
- Resolves https://codeberg.org/forgejo/forgejo/issues/949
(cherry picked from commit fd34fdac14)
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: silverwind <me@silverwind.io>
- MySQL 5.7 support and testing is dropped
- MySQL tests now execute against 8.1, up from 5.7 and 8.0
- PostgreSQL 10 and 11 support ist dropped
- PostgreSQL tests now execute against 16, up from 15
- MSSQL 2008 support is dropped
- MSSQL tests now run against locked 2022 version
Fixes: https://github.com/go-gitea/gitea/issues/25657
Ref: https://endoflife.date/mysql
Ref: https://endoflife.date/postgresql
Ref: https://endoflife.date/mssqlserver
## ⚠️ BREAKING ⚠️
Support for MySQL 5.7, PostgreSQL 10 and 11, and MSSQL 2008 is dropped.
You are encouraged to upgrade to supported versions.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
Blank Issues should be enabled if they are not explicit disabled through
the `blank_issues_enabled` field of the Issue Config. The Implementation
has currently a Bug: If you create a Issue Config file with only
`contact_links` and without a `blank_issues_enabled` field,
`blank_issues_enabled` is set to false by default.
The fix is only one line, but I decided to also improve the tests to
make sure there are no other problems with the Implementation.
This is a bugfix, so it should be backported to 1.20.
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
They currently throw a Internal Server Error when you use them without a
token. Now they correctly return a `token is required` error.
This is no security issue. If you use this endpoints with a token that
don't have the correct permission, you get the correct error. This is
not affected by this PR.
1. The old `prepareQueryArg` did double-unescaping of form value.
2. By the way, remove the unnecessary `ctx.Flash = ...` in
`MockContext`.
Co-authored-by: Giteabot <teabot@gitea.io>
Just like `models/unittest`, the testing helper functions should be in a
separate package: `contexttest`
And complete the TODO:
> // TODO: move this function to other packages, because it depends on
"models" package
This PR implements a proposal to clean up the admin users table by
moving some information out to a separate user details page (which also
displays some additional information).
Other changes:
- move edit user page from `/admin/users/{id}` to
`/admin/users/{id}/edit` -> `/admin/users/{id}` now shows the user
details page
- show if user is instance administrator as a label instead of a
separate column
- separate explore users template into a page- and a shared one, to make
it possible to use it on the user details page
- fix issue where there was no margin between alert message and
following content on admin pages
<details>
<summary>Screenshots</summary>
![grafik](https://github.com/go-gitea/gitea/assets/47871822/1ad57ac9-f20a-45a4-8477-ffe572a41e9e)
![grafik](https://github.com/go-gitea/gitea/assets/47871822/25786ecd-cb9d-4c92-90f4-e7f4292c073b)
</details>
Partially resolves#25939
---------
Co-authored-by: Giteabot <teabot@gitea.io>
- Resolves https://codeberg.org/forgejo/forgejo/issues/580
- Return a `upload_field` to any release API response, which points to
the API URL for uploading new assets.
- Adds unit test.
- Adds integration testing to verify URL is returned correctly and that
upload endpoint actually works
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fixes: #26333.
Previously, this endpoint only updates the `StatusCheckContexts` field
when `EnableStatusCheck==true`, which makes it impossible to clear the
array otherwise.
This patch uses slice `nil`-ness to decide whether to update the list of
checks. The field is ignored when either the client explicitly passes in
a null, or just omits the field from the json ([which causes
`json.Unmarshal` to leave the struct field
unchanged](https://go.dev/play/p/Z2XHOILuB1Q)). I think this is a better
measure of intent than whether the `EnableStatusCheck` flag was set,
because it matches the semantics of other field types.
Also adds a test case. I noticed that [`testAPIEditBranchProtection`
only checks the branch
name](c1c83dbaec/tests/integration/api_branch_test.go (L68))
and no other fields, so I added some extra `GET` calls and specific
checks to make sure the fields are changing properly.
I added those checks the existing integration test; is that the right
place for it?
Fixes#25564Fixes#23191
- Api v2 search endpoint should return only the latest version matching
the query
- Api v3 search endpoint should return `take` packages not package
versions
I kept sending pull requests that consisted of one-line changes. It's
time to
settle this once and for all. (Maybe.)
- Explain Gitea behavior and the consequences of each
setting better, so that the user does not have to consult
the docs.
- Do not use different spellings of identical terms
interchangeably, e.g. `e-mail` and `email`.
- Use more conventional terms to describe the same things,
e.g. `Confirm Password` instead of `Re-Type Password`.
- Introduces additional clarification for Mirror Settings
- Small adjustments in test
- This is a cry for help.
- Grammar and spelling consistencies for en-US locale
(e.g. cancelled -> canceled)
- Introduce tooltip improvements.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- The permalink and 'Reference in New issue' URL of an renderable file
(those where you can see the source and a rendered version of it, such
as markdown) doesn't contain `?display=source`. This leads the issue
that the URL doesn't have any effect, as by default the rendered version
is shown and thus not the source.
- Add `?display=source` to the permalink URL and to 'Reference in New
Issue' if it's renderable file.
- Add integration testing.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1088
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
Until now expired package data gets deleted daily by a cronjob. The
admin page shows the size of all packages and the size of unreferenced
data. The users (#25035, #20631) expect the deletion of this data if
they run the cronjob from the admin page but the job only deletes data
older than 24h.
This PR adds a new button which deletes all expired data.
![grafik](https://github.com/go-gitea/gitea/assets/1666336/b3e35d73-9496-4fa7-a20c-e5d30b1f6850)
---------
Co-authored-by: silverwind <me@silverwind.io>
Follow #25229
Copy from
https://github.com/go-gitea/gitea/pull/26290#issuecomment-1663135186
The bug is that we cannot get changed files for the
`pull_request_target` event. This event runs in the context of the base
branch, so we won't get any changes if we call
`GetFilesChangedSinceCommit` with `PullRequest.Base.Ref`.
- `setting.UI.Notification.EventSourceUpdateTime` is by default 10
seconds, which adds an 10 second delay before the test succeeds.
- Lower the interval to reduce it to at most 3 second delay (the code
only send events when they are at least 2 seconds old).
(cherry picked from commit 3adb9ae600)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1166
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
Not too important, but I think that it'd be a pretty neat touch.
Also fixes some layout bugs introduced by a previous PR.
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#24662.
Replace #24822 and #25708 (although it has been merged)
## Background
In the past, Gitea supported issue searching with a keyword and
conditions in a less efficient way. It worked by searching for issues
with the keyword and obtaining limited IDs (as it is heavy to get all)
on the indexer (bleve/elasticsearch/meilisearch), and then querying with
conditions on the database to find a subset of the found IDs. This is
why the results could be incomplete.
To solve this issue, we need to store all fields that could be used as
conditions in the indexer and support both keyword and additional
conditions when searching with the indexer.
## Major changes
- Redefine `IndexerData` to include all fields that could be used as
filter conditions.
- Refactor `Search(ctx context.Context, kw string, repoIDs []int64,
limit, start int, state string)` to `Search(ctx context.Context, options
*SearchOptions)`, so it supports more conditions now.
- Change the data type stored in `issueIndexerQueue`. Use
`IndexerMetadata` instead of `IndexerData` in case the data has been
updated while it is in the queue. This also reduces the storage size of
the queue.
- Enhance searching with Bleve/Elasticsearch/Meilisearch, make them
fully support `SearchOptions`. Also, update the data versions.
- Keep most logic of database indexer, but remove
`issues.SearchIssueIDsByKeyword` in `models` to avoid confusion where is
the entry point to search issues.
- Start a Meilisearch instance to test it in unit tests.
- Add unit tests with almost full coverage to test
Bleve/Elasticsearch/Meilisearch indexer.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The API should only return the real Mail of a User, if the caller is
logged in. The check do to this don't work. This PR fixes this. This not
really a security issue, but can lead to Spam.
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix#25934
Add `ignoreGlobal` parameter to `reqUnitAccess` and only check global
disabled units when `ignoreGlobal` is true. So the org-level projects
and user-level projects won't be affected by global disabled
`repo.projects` unit.
The setting `MAILER_TYPE` is deprecated.
According to the config cheat sheet, it should be `PROTOCOL`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The version listed in rpm repodata should only contain the rpm version
(1.0.0) and not the combination of version and release (1.0.0-2). We
correct this behaviour in primary.xml.gz, filelists.xml.gz and
others.xml.gz.
Signed-off-by: Peter Verraedt <peter@verraedt.be>
Replace #25892
Close #21942
Close #25464
Major changes:
1. Serve "robots.txt" and ".well-known/security.txt" in the "public"
custom path
* All files in "public/.well-known" can be served, just like
"public/assets"
3. Add a test for ".well-known/security.txt"
4. Simplify the "FileHandlerFunc" logic, now the paths are consistent so
the code can be simpler
5. Add CORS header for ".well-known" endpoints
6. Add logs to tell users they should move some of their legacy custom
public files
```
2023/07/19 13:00:37 cmd/web.go:178:serveInstalled() [E] Found legacy public asset "img" in CustomPath. Please move it to /work/gitea/custom/public/assets/img
2023/07/19 13:00:37 cmd/web.go:182:serveInstalled() [E] Found legacy public asset "robots.txt" in CustomPath. Please move it to /work/gitea/custom/public/robots.txt
```
This PR is not breaking.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Replace #10912
And there are many new tests to cover the CLI behavior
There were some concerns about the "option order in hook scripts"
(https://github.com/go-gitea/gitea/pull/10912#issuecomment-1137543314),
it's not a problem now. Because the hook script uses `/gitea hook
--config=/app.ini pre-receive` format. The "config" is a global option,
it can appear anywhere.
----
## ⚠️ BREAKING ⚠️
This PR does it best to avoid breaking anything. The major changes are:
* `gitea` itself won't accept web's options: `--install-port` / `--pid`
/ `--port` / `--quiet` / `--verbose` .... They are `web` sub-command's
options.
* Use `./gitea web --pid ....` instead
* `./gitea` can still run the `web` sub-command as shorthand, with
default options
* The sub-command's options must follow the sub-command
* Before: `./gitea --sub-opt subcmd` might equal to `./gitea subcmd
--sub-opt` (well, might not ...)
* After: only `./gitea subcmd --sub-opt` could be used
* The global options like `--config` are not affected
Fix#25776. Close#25826.
In the discussion of #25776, @wolfogre's suggestion was to remove the
commit status of `running` and `warning` to keep it consistent with
github.
references:
-
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#about-commit-statuses
## ⚠️ BREAKING ⚠️
So the commit status of Gitea will be consistent with GitHub, only
`pending`, `success`, `error` and `failure`, while `warning` and
`running` are not supported anymore.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
current actions artifacts implementation only support single file
artifact. To support multiple files uploading, it needs:
- save each file to each db record with same run-id, same artifact-name
and proper artifact-path
- need change artifact uploading url without artifact-id, multiple files
creates multiple artifact-ids
- support `path` in download-artifact action. artifact should download
to `{path}/{artifact-path}`.
- in repo action view, it provides zip download link in artifacts list
in summary page, no matter this artifact contains single or multiple
files.
Before: the concept "Content string" is used everywhere. It has some
problems:
1. Sometimes it means "base64 encoded content", sometimes it means "raw
binary content"
2. It doesn't work with large files, eg: uploading a 1G LFS file would
make Gitea process OOM
This PR does the refactoring: use "ContentReader" / "ContentBase64"
instead of "Content"
This PR is not breaking because the key in API JSON is still "content":
`` ContentBase64 string `json:"content"` ``
we refactored `userIDFromToken` for the token parsing part into a new
function `parseToken`. `parseToken` returns the string `token` from
request, and a boolean `ok` representing whether the token exists or
not. So we can distinguish between token non-existence and token
inconsistency in the `verfity` function, thus solving the problem of no
proper error message when the token is inconsistent.
close#24439
related #22119
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes (?) #25538
Fixes https://codeberg.org/forgejo/forgejo/issues/972
Regression #23879#23879 introduced a change which prevents read access to packages if a
user is not a member of an organization.
That PR also contained a change which disallows package access if the
team unit is configured with "no access" for packages. I don't think
this change makes sense (at the moment). It may be relevant for private
orgs. But for public or limited orgs that's useless because an
unauthorized user would have more access rights than the team member.
This PR restores the old behaviour "If a user has read access for an
owner, they can read packages".
---------
Co-authored-by: Giteabot <teabot@gitea.io>
related #16865
This PR adds an accessibility check before mounting container blobs.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
This PR will display a pull request creation hint on the repository home
page when there are newly created branches with no pull request. Only
the recent 6 hours and 2 updated branches will be displayed.
Inspired by #14003
Replace #14003Resolves#311Resolves#13196Resolves#23743
co-authored by @kolaente
Follow #25229
At present, when the trigger event is `pull_request_target`, the `ref`
and `sha` of `ActionRun` are set according to the base branch of the
pull request. This makes it impossible for us to find the head branch of
the `ActionRun` directly. In this PR, the `ref` and `sha` will always be
set to the head branch and they will be changed to the base branch when
generating the task context.
Fixes#24723
Direct serving of content aka HTTP redirect is not mentioned in any of
the package registry specs but lots of official registries do that so it
should be supported by the usual clients.
Fix#25558
Extract from #22743
This PR added a repository's check when creating/deleting branches via
API. Mirror repository and archive repository cannot do that.
This adds an API for uploading and Deleting Avatars for of Users, Repos
and Organisations. I'm not sure, if this should also be added to the
Admin API.
Resolves#25344
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fix#25088
This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close#24818Close#24222Close#21606Close#21498Close#25107Close#24981
Maybe close#24503
Replace #23301
Replace #22754
And maybe more
### Summary
Extend the template variable substitution to replace file paths. This
can be helpful for setting up log files & directories that should match
the repository name.
### PR Changes
- Move files matching glob pattern when setting up repos from template
- For security, added ~escaping~ sanitization for cross-platform support
and to prevent directory traversal (thanks @silverwind for the
reference)
- Added unit testing for escaping function
- Fixed the integration tests for repo template generation by passing
the repo_template_id
- Updated the integration testfiles to add some variable substitution &
assert the outputs
I had to fix the existing repo template integration test and extend it
to add a check for variable substitutions.
Example:
![image](https://github.com/go-gitea/gitea/assets/12700993/621feb09-0ef3-460e-afa8-da74cd84fa4e)
Fix#21072
![image](https://github.com/go-gitea/gitea/assets/15528715/96b30beb-7f88-4a60-baae-2e5ad8049555)
Username Attribute is not a required item when creating an
authentication source. If Username Attribute is empty, the username
value of LDAP user cannot be read, so all users from LDAP will be marked
as inactive by mistake when synchronizing external users.
This PR improves the sync logic, if username is empty, the email address
will be used to find user.
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Clarify the "link-action" behavior:
> // A "link-action" can post AJAX request to its "data-url"
> // Then the browser is redirect to: the "redirect" in response, or
"data-redirect" attribute, or current URL by reloading.
And enhance the "link-action" to support showing a modal dialog for
confirm. A similar general approach could also help PRs like
https://github.com/go-gitea/gitea/pull/22344#discussion_r1062883436
> // If the "link-action" has "data-modal-confirm(-html)" attribute, a
confirm modal dialog will be shown before taking action.
And a lot of duplicate code can be removed now. A good framework design
can help to avoid code copying&pasting.
---------
Co-authored-by: silverwind <me@silverwind.io>
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
The PKCE flow according to [RFC
7636](https://datatracker.ietf.org/doc/html/rfc7636) allows for secure
authorization without the requirement to provide a client secret for the
OAuth app.
It is implemented in Gitea since #5378 (v1.8.0), however without being
able to omit client secret.
Since #21316 Gitea supports setting client type at OAuth app
registration.
As public clients are already forced to use PKCE since #21316, in this
PR the client secret check is being skipped if a public client is
detected. As Gitea seems to implement PKCE authorization correctly
according to the spec, this would allow for PKCE flow without providing
a client secret.
Also add some docs for it, please check language as I'm not a native
English speaker.
Closes#17107Closes#25047
The admin config page has been broken for many many times, a little
refactoring would make this page panic.
So, add a test for it, and add another test to cover the 500 error page.
Co-authored-by: Giteabot <teabot@gitea.io>
This PR creates an API endpoint for creating/updating/deleting multiple
files in one API call similar to the solution provided by
[GitLab](https://docs.gitlab.com/ee/api/commits.html#create-a-commit-with-multiple-files-and-actions).
To archive this, the CreateOrUpdateRepoFile and DeleteRepoFIle functions
in files service are unified into one function supporting multiple files
and actions.
Resolves#14619
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
![grafik](https://user-images.githubusercontent.com/15185051/235123207-0aa39869-bb48-45c3-abe2-ba1e836046ec.png)
![grafik](https://user-images.githubusercontent.com/15185051/235123297-152a16ea-a857-451d-9a42-61f2cd54dd75.png)
![grafik](https://user-images.githubusercontent.com/15185051/235640782-cbfe25ec-6254-479a-a3de-133e585d7a2d.png)
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close#12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
![image](https://github.com/go-gitea/gitea/assets/2114189/4462d713-ba39-41f5-bb08-de912e67e1ff)
![image](https://github.com/go-gitea/gitea/assets/2114189/b188035e-f691-428b-8b2d-ff7b2199b2f9)
![image](https://github.com/go-gitea/gitea/assets/2114189/132e9745-1c3b-4e00-9e0d-15eaea495dee)
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR is a refactor at the beginning. And now it did 4 things.
- [x] Move renaming organizaiton and user logics into services layer and
merged as one function
- [x] Support rename a user capitalization only. For example, rename the
user from `Lunny` to `lunny`. We just need to change one table `user`
and others should not be touched.
- [x] Before this PR, some renaming were missed like `agit`
- [x] Fix bug the API reutrned from `http.StatusNoContent` to `http.StatusOK`
fix#12192 Support SSH for go get
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: mfk <mfk@hengwei.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
Fixes#24145
To solve the bug, I added a "computed" `TargetBehind` field to the
`Release` model, which indicates the target branch of a release.
This is particularly useful if the target branch was deleted in the
meantime (or is empty).
I also did a micro-optimization in `calReleaseNumCommitsBehind`. Instead
of checking that a branch exists and then call `GetBranchCommit`, I
immediately call `GetBranchCommit` and handle the `git.ErrNotExist`
error.
This optimization is covered by the added unit test.
The `GetAllCommits` endpoint can be pretty slow, especially in repos
with a lot of commits. The issue is that it spends a lot of time
calculating information that may not be useful/needed by the user.
The `stat` param was previously added in #21337 to address this, by
allowing the user to disable the calculating stats for each commit. But
this has two issues:
1. The name `stat` is rather misleading, because disabling `stat`
disables the Stat **and** Files. This should be separated out into two
different params, because getting a list of affected files is much less
expensive than calculating the stats
2. There's still other costly information provided that the user may not
need, such as `Verification`
This PR, adds two parameters to the endpoint, `files` and `verification`
to allow the user to explicitly disable this information when listing
commits. The default behavior is true.
This fixes up https://github.com/go-gitea/gitea/pull/10446; in that, the
*expected* timezone was changed to the local timezone, but the computed
timezone was left in UTC.
The result was this failure, when run on a non-UTC system:
```
Diff:
--- Expected
+++ Actual
@@ -5,3 +5,3 @@
commitMsg: (string) (len=12) "init project",
- commitTime: (string) (len=29) "Wed, 14 Jun 2017 09:54:21 EDT"
+ commitTime: (string) (len=29) "Wed, 14 Jun 2017 13:54:21 UTC"
},
@@ -11,3 +11,3 @@
commitMsg: (string) (len=12) "init project",
- commitTime: (string) (len=29) "Wed, 14 Jun 2017 09:54:21 EDT"
+ commitTime: (string) (len=29) "Wed, 14 Jun 2017 13:54:21 UTC"
}
Test: TestViewRepo2
```
I assume this was probably missed since the CI servers all run in UTC?
The Format() string "Mon, 02 Jan 2006 15:04:05 UTC" was incorrect: 'UTC'
isn't recognized as a variable placeholder, but was just being copied
verbatim. It should use 'MST' in order to command Format() to output the
attached timezone, which is what `time.RFC1123` has.
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
![image](https://user-images.githubusercontent.com/2114189/236620635-55576955-f95d-4810-b12f-879026a3afdf.png)
Due to #24409 , we can now specify '--not' when getting all commits from
a repo to exclude commits from a different branch.
When I wrote that PR, I forgot to also update the code that counts the
number of commits in the repo. So now, if the --not option is used, it
may return too many commits, which can indicate that another page of
data is available when it is not.
This PR passes --not to the commands that count the number of commits in
a repo
This gives more "freshness" to the explore page. So it's not just the
same X users on the explore page by default, now it matches the same
sort as the repos on the explore page.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This pull request adds an integration test to validate the behavior of
raw content API's reference handling for all supported formats .
close #24242
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: @awkwardbunny
This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.
---------
Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Fix https://github.com/go-gitea/gitea/pull/24362/files#r1179095324
`getAuthenticatedMeta` has checked them, these code are duplicated one.
And the first invokation has a wrong permission check. `DownloadHandle`
should require read permission but not write.
> The scoped token PR just checked all API routes but in fact, some web
routes like `LFS`, git `HTTP`, container, and attachments supports basic
auth. This PR added scoped token check for them.
---------
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This adds a API for getting License templates. This tries to be as close
to the [GitHub
API](https://docs.github.com/en/rest/licenses?apiVersion=2022-11-28) as
possible, but Gitea does not support all features that GitHub has. I
think they should been added, but this out f the scope of this PR. You
should merge #23006 before this PR for security reasons.
Follow #22719
### Major changes
1. `ServerError` doesn't do format, so remove the `%s`
2. Simplify `RenderBranchFeed` (slightly)
3. Remove unused `BranchFeedRSS`
4. Make `feed.RenderBranchFeed` respect `EnableFeed` config
5. Make `RepoBranchTagSelector.vue` respect `EnableFeed` setting,
otherwise there is always RSS icon
6. The `(branchURLPrefix + item.url).replace('src', 'rss')` doesn't seem
right for all cases, for example, the string `src` could appear in
`branchURLPrefix`, so we need a separate `rssURLPrefix`
7. The `<a>` in Vue menu needs `@click.stop`, otherwise the menu itself
would be triggered at the same time
8. Change `<a><button></button></a>` to `<a role=button>`
9. Use `{{PathEscapeSegments .TreePath}}` instead of `{{range $i, $v :=
.TreeNames}}/{{$v}}{{end}}`
Screenshot of changed parts:
<details>
![image](https://user-images.githubusercontent.com/2114189/234315538-66603694-9093-48a8-af33-83575fd7a018.png)
![image](https://user-images.githubusercontent.com/2114189/234315786-f1efa60b-012e-490b-8ce2-d448dc6fe5c9.png)
![image](https://user-images.githubusercontent.com/2114189/234334941-446941bc-1baa-4256-8850-ccc439476cda.png)
</details>
### Other thoughts
Should we remove the RSS icon from the branch dropdown list? It seems
too complex for a list UI, and users already have the chance to get the
RSS feed URL from "branches" page.
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: silverwind <me@silverwind.io>
Enable [forbidigo](https://github.com/ashanbrown/forbidigo) linter which
forbids print statements. Will check how to integrate this with the
smallest impact possible, so a few `nolint` comments will likely be
required. Plan is to just go through the issues and either:
- Remove the print if it is nonsensical
- Add a `//nolint` directive if it makes sense
I don't plan on investigating the individual issues any further.
<details>
<summary>Initial Lint Results</summary>
```
modules/log/event.go:348:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/log/event.go:382:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/queue/unique_queue_disk_channel_test.go:20:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("TempDir %s\n", tmpDir)
^
contrib/backport/backport.go:168:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Backporting %s to %s as %s\n", pr, localReleaseBranch, backportBranch)
^
contrib/backport/backport.go:216:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Navigate to %s to open PR\n", url)
^
contrib/backport/backport.go:223:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `xdg-open %s`\n", url)
^
contrib/backport/backport.go:233:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git push -u %s %s`\n", remote, backportBranch)
^
contrib/backport/backport.go:243:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Amending commit to prepend `Backport #%s` to body\n", pr)
^
contrib/backport/backport.go:272:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("* Attempting git cherry-pick --continue")
^
contrib/backport/backport.go:281:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Attempting git cherry-pick %s\n", sha)
^
contrib/backport/backport.go:297:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s\n", currentBranch)
^
contrib/backport/backport.go:299:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s - not checking out\n", currentBranch)
^
contrib/backport/backport.go:304:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Branch %s already exists. Checking it out...\n", backportBranch)
^
contrib/backport/backport.go:308:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git checkout -b %s %s`\n", backportBranch, releaseBranch)
^
contrib/backport/backport.go:313:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s main`\n", remote)
^
contrib/backport/backport.go:316:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:319:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:321:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s %s`\n", remote, releaseBranch)
^
contrib/backport/backport.go:324:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:327:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
models/unittest/fixtures.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Unsupported RDBMS for integration tests")
^
models/unittest/fixtures.go:89:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("LoadFixtures failed after retries: %v\n", err)
^
models/unittest/fixtures.go:110:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to generate sequence update: %v\n", err)
^
models/unittest/fixtures.go:117:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to update sequence: %s Error: %v\n", value, err)
^
models/migrations/base/tests.go:118:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Environment variable $GITEA_ROOT not set")
^
models/migrations/base/tests.go:127:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Could not find gitea binary at %s\n", setting.AppPath)
^
models/migrations/base/tests.go:134:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set - defaulting to %s\n", giteaConf)
^
models/migrations/base/tests.go:145:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to create temporary data path %v\n", err)
^
models/migrations/base/tests.go:154:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to InitFull: %v\n", err)
^
models/migrations/v1_11/v112.go:34:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error: %v", err)
^
contrib/fixtures/fixture_generation.go:36:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("CreateTestEngine: %+v", err)
^
contrib/fixtures/fixture_generation.go:40:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("PrepareTestDatabase: %+v\n", err)
^
contrib/fixtures/fixture_generation.go:46:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", r, err)
^
contrib/fixtures/fixture_generation.go:53:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", g.name, err)
^
contrib/fixtures/fixture_generation.go:71:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s created.\n", path)
^
services/gitdiff/gitdiff_test.go:543:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:560:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:577:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
modules/web/routing/logger_manager.go:34:2: use of `print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
print Printer
^
modules/doctor/paths.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Warning: can't remove temporary file: '%s'\n", tmpFile.Name())
^
tests/test_utils.go:33:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf(format+"\n", args...)
^
tests/test_utils.go:61:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set, use default: %s\n", giteaConf)
^
cmd/actions.go:54:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("%s\n", respText)
^
cmd/admin_user_change_password.go:74:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s's password has been successfully updated!\n", user.Name)
^
cmd/admin_user_create.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generated random password is '%s'\n", password)
^
cmd/admin_user_create.go:164:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created... %s\n", t.Token)
^
cmd/admin_user_create.go:167:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("New user '%s' has been successfully created!\n", username)
^
cmd/admin_user_generate_access_token.go:74:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s\n", t.Token)
^
cmd/admin_user_generate_access_token.go:76:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created: %s\n", t.Token)
^
cmd/admin_user_must_change_password.go:56:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Updated %d users setting MustChangePassword to %t\n", n, mustChangePassword)
^
cmd/convert.go:44:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's character set is now utf8mb4")
^
cmd/convert.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's all columns character is NVARCHAR now")
^
cmd/convert.go:52:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("This command can only be used with a MySQL or MSSQL database")
^
cmd/doctor.go:104:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/doctor.go:105:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Check if you are using the right config file. You can use a --config directive to specify one.")
^
cmd/doctor.go:243:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/embedded.go:154:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(a.path)
^
cmd/embedded.go:198:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Using app.ini at", setting.CustomConf)
^
cmd/embedded.go:217:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Extracting to %s:\n", destdir)
^
cmd/embedded.go:253:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s already exists; skipped.\n", dest)
^
cmd/embedded.go:275:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(dest)
^
cmd/generate.go:63:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", internalToken)
^
cmd/generate.go:66:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:78:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", JWTSecretBase64)
^
cmd/generate.go:81:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:93:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", secretKey)
^
cmd/generate.go:96:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/keys.go:74:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(strings.TrimSpace(authorizedString))
^
cmd/mailer.go:32:4: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("warning: Content is empty")
^
cmd/mailer.go:35:3: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("Proceed with sending email? [Y/n] ")
^
cmd/mailer.go:40:4: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("The mail was not sent")
^
cmd/mailer.go:49:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("Sent %s email(s) to all users\n", respText)
^
cmd/serv.go:147:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Gitea: SSH has been disabled")
^
cmd/serv.go:153:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("error showing subcommand help: %v\n", err)
^
cmd/serv.go:175:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the deploy key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:177:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the principal " + key.Content + ", but Gitea does not provide shell access.")
^
cmd/serv.go:179:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there, " + user.Name + "! You've successfully authenticated with the key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:181:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("If this is unexpected, please log in with password and setup Gitea under another user.")
^
cmd/serv.go:196:5: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print(`{"type":"gitea","version":1}`)
^
tests/e2e/e2e_test.go:54:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/e2e/e2e_test.go:63:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/e2e/e2e_test.go:67:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/e2e/e2e_test.go:109:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/e2e/e2e_test.go:110:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stderr.String())
^
tests/e2e/e2e_test.go:113:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/integration/integration_test.go:124:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/integration/integration_test.go:135:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/integration/integration_test.go:139:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/integration/repo_test.go:357:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", resp.Body)
^
```
</details>
---------
Co-authored-by: Giteabot <teabot@gitea.io>
- Update all tool dependencies to latest tag
- Remove unused errcheck, it is part of golangci-lint
- Include main.go in air
- Enable wastedassign again now that it's
[generics-compatible](https://github.com/golangci/golangci-lint/pull/3689)
- Restructured lint targets to new `lint-*` namespace
Before, there was a `log/buffer.go`, but that design is not general, and
it introduces a lot of irrelevant `Content() (string, error) ` and
`return "", fmt.Errorf("not supported")` .
And the old `log/buffer.go` is difficult to use, developers have to
write a lot of `Contains` and `Sleep` code.
The new `LogChecker` is designed to be a general approach to help to
assert some messages appearing or not appearing in logs.
Close#24062
At the beginning, I just wanted to fix the warning mentioned by #24062
But, the cookie code really doesn't look good to me, so clean up them.
Complete the TODO on `SetCookie`:
> TODO: Copied from gitea.com/macaron/macaron and should be improved
after macaron removed.
I've heard many reports of users getting scared when they see their own
email address for their own profile, as they believe that the email
field is also visible to other users. Currently, using Incognito mode
or going over the Settings is the only "reasonable" way to verify this
from the perspective of the user.
A locked padlock should be enough to indicate that the email is not
visible to anyone apart from the user and the admins. An unlocked
padlock is used if the email address is only shown to authenticated
users.
Some additional string-related changes in the Settings were introduced
as well to ensure consistency, and the comments in the relevant tests
were improved so as to allow for easier modifications in the future.
---
#### Screenshot (EDIT: Scroll down for more up-to-date screenshots)
***Please remove this section before merging.***
![image](https://user-images.githubusercontent.com/30193966/229572425-909894aa-a7d5-4bf3-92d3-23b1921dcc90.png)
This lock should only appear if the email address is explicitly hidden
using the `Hide Email Address` setting. The change was originally tested
on top of and designed for the Forgejo fork, but I don't expect any
problems to arise from this and I don't think that a
documentation-related change is strictly necessary.
---------
Co-authored-by: silverwind <me@silverwind.io>
None of the features of `unrolled/render` package is used.
The Golang builtin "html/template" just works well. Then we can improve
our HTML render to resolve the "$.root.locale.Tr" problem as much as
possible.
Next step: we can have a template render pool (by Clone), then we can
inject global functions with dynamic context to every `Execute` calls.
Then we can use `{{Locale.Tr ....}}` directly in all templates , no need
to pass the `$.root.locale` again and again.
At first, we have one unified team unit permission which is called
`Team.Authorize` in DB.
But since https://github.com/go-gitea/gitea/pull/17811, we allowed
different units to have different permission.
The old code is only designed for the old version. So after #17811, if
org users have write permission of other units, but have no permission
of packages, they can also get write permission of packages.
Co-authored-by: delvh <dev.lh@web.de>
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
Closes#20955
This PR adds the possibility to disable blank Issues, when the Repo has
templates. This can be done by creating the file
`.gitea/issue_config.yaml` with the content `blank_issues_enabled` in
the Repo.
Always respect the `setting.UI.ShowUserEmail` and `KeepEmailPrivate`
setting.
* It doesn't make sense to show user's own E-mail to themself.
* Always hide the E-mail if KeepEmailPrivate=true, then the user could
know how their profile page looks like for others.
* Revert the `setting.UI.ShowUserEmail` change from #4981 . This setting
is used to control the E-mail display, not only for the user list page.
ps: the incorrect `<div .../>` tag on the profile page has been fixed by
#23748 together, so this PR becomes simpler.
* Clean the "tools" directory. The "tools" directory contains only two
files, move them.
* The "external_renderer.go" works like "cat" command to echo Stdin to
Stdout , to help testing.
* The `// gobuild: external_renderer` is incorrect, there should be no
space: `//gobuild: external_renderer`
* The `fmt.Print(os.Args[1])` is not a well-defined behavior, and it's
never used.
* The "watch.sh" is for "make watch", it's somewhat related to "build"
* After this PR, there is no "tools" directory, the project root
directory looks slightly simpler than before.
* Remove the legacy "contrib/autoboot.sh", there is no
"gogs_supervisord.sh"
* Remove the legacy "contrib/mysql.sql", it's never mentioned anywhere.
* Remove the legacy "contrib/pr/checkout.go", it has been broken for
long time, and it introduces unnecessary dependencies of the main code
base.
Follow:
* #23574
* Remove all ".tooltip[data-content=...]"
Major changes:
* Remove "tooltip" class, use "[data-tooltip-content=...]" instead of
".tooltip[data-content=...]"
* Remove legacy `data-position`, it's dead code since last Fomantic
Tooltip -> Tippy Tooltip refactoring
* Rename reaction attribute from `data-content` to
`data-reaction-content`
* Add comments for some `data-content`: `{{/* used by the form */}}`
* Remove empty "ui" class
* Use "text color" for SVG icons (a few)
Close#23444
Add `Repository` to npm package `Metadata` struct so the `repository` in
`package.json` can be stored and be returned in the endpoint.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
`namedBlob` turned out to be a poor imitation of a `TreeEntry`. Using
the latter directly shortens this code.
This partially undoes https://github.com/go-gitea/gitea/pull/23152/,
which I found a merge conflict with, and also expands the test it added
to cover the subtle README-in-a-subfolder case.
Support to iterator subdirectory in ObjectStorage for
ObjectStorage.Iterator method.
It's required for https://github.com/go-gitea/gitea/pull/22738 to make
artifact files cleanable.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- This PR attempts to split our various DB tests into separate
pipelines.
- It splits up some of the extra feature-related tests rather than
having most of them in the MySQL test.
- It disables the race detector for some of the pipelines as well, as it
can cause slower runs and is mostly redundant when the pipelines just
swap DBs.
- It builds without SQLite support for any of the non-SQLite pipelines.
- It moves the e2e test to using SQLite rather than PG (partially
because I moved the minio tests to PG and that mucked up the test
config, and partially because it avoids another running service)
- It splits up the `go mod download` task in the Makefile from the tool
installation, as the tools are only needed in the compliance pipeline.
(Arguably even some of the tools aren't needed there, but that could be
a follow-up PR)
- SQLite is now the only arm64 pipeline, moving PG back to amd64 which
can leverage autoscaler
Should resolve#22010 - one thing that wasn't changed here but is
mentioned in that issue, unit tests are needed in the same pipeline as
an integration test in order to form a complete coverage report (at
least as far as I could tell), so for now it remains in a pipeline with
a DB integration test.
Please let me know if I've inadvertently changed something that was how
it was on purpose.
---
I will say sometimes it's hard to pin down the average time, as a
pipeline could be waiting for a runner for X minutes and that brings the
total up by X minutes as well, but overall this does seem to be faster
on average.
---------
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Add test coverage to the important features of
[`routers.web.repo.renderReadmeFile`](067b0c2664/routers/web/repo/view.go (L273));
namely that:
- it can handle looking in docs/, .gitea/, and .github/
- it can handle choosing between multiple competing READMEs
- it prefers the localized README to the markdown README to the
plaintext README
- it can handle broken symlinks when processing all the options
- it uses the name of the symlink, not the name of the target of the
symlink
Replace #23350.
Refactor `setting.Database.UseMySQL` to
`setting.Database.Type.IsMySQL()`.
To avoid mismatching between `Type` and `UseXXX`.
This refactor can fix the bug mentioned in #23350, so it should be
backported.
`renderReadmeFile` needs `readmeTreelink` as parameter but gets
`treeLink`.
The values of them look like as following:
`treeLink`: `/{OwnerName}/{RepoName}/src/branch/{BranchName}`
`readmeTreelink`:
`/{OwnerName}/{RepoName}/src/branch/{BranchName}/{ReadmeFileName}`
`path.Dir` in
8540fc45b1/routers/web/repo/view.go (L316)
should convert `readmeTreelink` into
`/{OwnerName}/{RepoName}/src/branch/{BranchName}` instead of the current
`/{OwnerName}/{RepoName}/src/branch`.
Fixes#23151
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
minio/sha256-simd provides additional acceleration for SHA256 using
AVX512, SHA Extensions for x86 and ARM64 for ARM.
It provides a drop-in replacement for crypto/sha256 and if the
extensions are not available it falls back to standard crypto/sha256.
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Since #22632, when a commit status has multiple checks, no check is
shown at all (hence no way to see the other checks).
This PR fixes this by always adding a tag with the
`.commit-statuses-trigger` to the DOM (the `.vm` is for vertical
alignment).
![2023-02-13-120528](https://user-images.githubusercontent.com/3864879/218441846-1a79c169-2efd-46bb-9e75-d8b45d7cc8e3.png)
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Some bugs caused by less unit tests in fundamental packages. This PR
refactor `setting` package so that create a unit test will be easier
than before.
- All `LoadFromXXX` files has been splited as two functions, one is
`InitProviderFromXXX` and `LoadCommonSettings`. The first functions will
only include the code to create or new a ini file. The second function
will load common settings.
- It also renames all functions in setting from `newXXXService` to
`loadXXXSetting` or `loadXXXFrom` to make the function name less
confusing.
- Move `XORMLog` to `SQLLog` because it's a better name for that.
Maybe we should finally move these `loadXXXSetting` into the `XXXInit`
function? Any idea?
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
Add a new "exclusive" option per label. This makes it so that when the
label is named `scope/name`, no other label with the same `scope/`
prefix can be set on an issue.
The scope is determined by the last occurence of `/`, so for example
`scope/alpha/name` and `scope/beta/name` are considered to be in
different scopes and can coexist.
Exclusive scopes are not enforced by any database rules, however they
are enforced when editing labels at the models level, automatically
removing any existing labels in the same scope when either attaching a
new label or replacing all labels.
In menus use a circle instead of checkbox to indicate they function as
radio buttons per scope. Issue filtering by label ensures that only a
single scoped label is selected at a time. Clicking with alt key can be
used to remove a scoped label, both when editing individual issues and
batch editing.
Label rendering refactor for consistency and code simplification:
* Labels now consistently have the same shape, emojis and tooltips
everywhere. This includes the label list and label assignment menus.
* In label list, show description below label same as label menus.
* Don't use exactly black/white text colors to look a bit nicer.
* Simplify text color computation. There is no point computing luminance
in linear color space, as this is a perceptual problem and sRGB is
closer to perceptually linear.
* Increase height of label assignment menus to show more labels. Showing
only 3-4 labels at a time leads to a lot of scrolling.
* Render all labels with a new RenderLabel template helper function.
Label creation and editing in multiline modal menu:
* Change label creation to open a modal menu like label editing.
* Change menu layout to place name, description and colors on separate
lines.
* Don't color cancel button red in label editing modal menu.
* Align text to the left in model menu for better readability and
consistent with settings layout elsewhere.
Custom exclusive scoped label rendering:
* Display scoped label prefix and suffix with slightly darker and
lighter background color respectively, and a slanted edge between them
similar to the `/` symbol.
* In menus exclusive labels are grouped with a divider line.
---------
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
To avoid duplicated load of the same data in an HTTP request, we can set
a context cache to do that. i.e. Some pages may load a user from a
database with the same id in different areas on the same page. But the
code is hidden in two different deep logic. How should we share the
user? As a result of this PR, now if both entry functions accept
`context.Context` as the first parameter and we just need to refactor
`GetUserByID` to reuse the user from the context cache. Then it will not
be loaded twice on an HTTP request.
But of course, sometimes we would like to reload an object from the
database, that's why `RemoveContextData` is also exposed.
The core context cache is here. It defines a new context
```go
type cacheContext struct {
ctx context.Context
data map[any]map[any]any
lock sync.RWMutex
}
var cacheContextKey = struct{}{}
func WithCacheContext(ctx context.Context) context.Context {
return context.WithValue(ctx, cacheContextKey, &cacheContext{
ctx: ctx,
data: make(map[any]map[any]any),
})
}
```
Then you can use the below 4 methods to read/write/del the data within
the same context.
```go
func GetContextData(ctx context.Context, tp, key any) any
func SetContextData(ctx context.Context, tp, key, value any)
func RemoveContextData(ctx context.Context, tp, key any)
func GetWithContextCache[T any](ctx context.Context, cacheGroupKey string, cacheTargetID any, f func() (T, error)) (T, error)
```
Then let's take a look at how `system.GetString` implement it.
```go
func GetSetting(ctx context.Context, key string) (string, error) {
return cache.GetWithContextCache(ctx, contextCacheKey, key, func() (string, error) {
return cache.GetString(genSettingCacheKey(key), func() (string, error) {
res, err := GetSettingNoCache(ctx, key)
if err != nil {
return "", err
}
return res.SettingValue, nil
})
})
}
```
First, it will check if context data include the setting object with the
key. If not, it will query from the global cache which may be memory or
a Redis cache. If not, it will get the object from the database. In the
end, if the object gets from the global cache or database, it will be
set into the context cache.
An object stored in the context cache will only be destroyed after the
context disappeared.
As discussed in #22847 the helpers in helpers.less need to have a
separate prefix as they are causing conflicts with fomantic styles
This will allow us to have the `.gt-hidden { display:none !important; }`
style that is needed to for the reverted PR.
Of note in doing this I have noticed that there was already a conflict
with at least one chroma style which this PR now avoids.
I've also added in the `gt-hidden` style that matches the tailwind one
and switched the code that needed it to use that.
Signed-off-by: Andrew Thornton <art27@cantab.net>
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#19555
Test-Instructions:
https://github.com/go-gitea/gitea/pull/21441#issuecomment-1419438000
This PR implements the mapping of user groups provided by OIDC providers
to orgs teams in Gitea. The main part is a refactoring of the existing
LDAP code to make it usable from different providers.
Refactorings:
- Moved the router auth code from module to service because of import
cycles
- Changed some model methods to take a `Context` parameter
- Moved the mapping code from LDAP to a common location
I've tested it with Keycloak but other providers should work too. The
JSON mapping format is the same as for LDAP.
![grafik](https://user-images.githubusercontent.com/1666336/195634392-3fc540fc-b229-4649-99ac-91ae8e19df2d.png)
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR follows #21535 (and replace #22592)
## Review without space diff
https://github.com/go-gitea/gitea/pull/22678/files?diff=split&w=1
## Purpose of this PR
1. Make git module command completely safe (risky user inputs won't be
passed as argument option anymore)
2. Avoid low-level mistakes like
https://github.com/go-gitea/gitea/pull/22098#discussion_r1045234918
3. Remove deprecated and dirty `CmdArgCheck` function, hide the `CmdArg`
type
4. Simplify code when using git command
## The main idea of this PR
* Move the `git.CmdArg` to the `internal` package, then no other package
except `git` could use it. Then developers could never do
`AddArguments(git.CmdArg(userInput))` any more.
* Introduce `git.ToTrustedCmdArgs`, it's for user-provided and already
trusted arguments. It's only used in a few cases, for example: use git
arguments from config file, help unit test with some arguments.
* Introduce `AddOptionValues` and `AddOptionFormat`, they make code more
clear and simple:
* Before: `AddArguments("-m").AddDynamicArguments(message)`
* After: `AddOptionValues("-m", message)`
* -
* Before: `AddArguments(git.CmdArg(fmt.Sprintf("--author='%s <%s>'",
sig.Name, sig.Email)))`
* After: `AddOptionFormat("--author='%s <%s>'", sig.Name, sig.Email)`
## FAQ
### Why these changes were not done in #21535 ?
#21535 is mainly a search&replace, it did its best to not change too
much logic.
Making the framework better needs a lot of changes, so this separate PR
is needed as the second step.
### The naming of `AddOptionXxx`
According to git's manual, the `--xxx` part is called `option`.
### How can it guarantee that `internal.CmdArg` won't be not misused?
Go's specification guarantees that. Trying to access other package's
internal package causes compilation error.
And, `golangci-lint` also denies the git/internal package. Only the
`git/command.go` can use it carefully.
### There is still a `ToTrustedCmdArgs`, will it still allow developers
to make mistakes and pass untrusted arguments?
Generally speaking, no. Because when using `ToTrustedCmdArgs`, the code
will be very complex (see the changes for examples). Then developers and
reviewers can know that something might be unreasonable.
### Why there was a `CmdArgCheck` and why it's removed?
At the moment of #21535, to reduce unnecessary changes, `CmdArgCheck`
was introduced as a hacky patch. Now, almost all code could be written
as `cmd := NewCommand(); cmd.AddXxx(...)`, then there is no need for
`CmdArgCheck` anymore.
### Why many codes for `signArg == ""` is deleted?
Because in the old code, `signArg` could never be empty string, it's
either `-S[key-id]` or `--no-gpg-sign`. So the `signArg == ""` is just
dead code.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
There are 2 separate flows of creating a user: authentication and source
sync.
When a group filter is defined, source sync ignores group filter, while
authentication respects it.
With this PR I've fixed this behavior, so both flows now apply this
filter when searching users in LDAP in a unified way.
- Unified LDAP group membership lookup for authentication and source
sync flows
- Replaced custom group membership lookup (used for authentication flow)
with an existing listLdapGroupMemberships method (used for source sync
flow)
- Modified listLdapGroupMemberships and getUserAttributeListedInGroup in
a way group lookup could be called separately
- Added user filtering based on a group membership for a source sync
- Added tests to cover this logic
Co-authored-by: Pavel Ezhov <paejov@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Disable this test for the moment because the used imap container image
seems unstable which results in many failed CI builds.
Co-authored-by: Jason Song <i@wolfogre.com>
This PR adds the support for scopes of access tokens, mimicking the
design of GitHub OAuth scopes.
The changes of the core logic are in `models/auth` that `AccessToken`
struct will have a `Scope` field. The normalized (no duplication of
scope), comma-separated scope string will be stored in `access_token`
table in the database.
In `services/auth`, the scope will be stored in context, which will be
used by `reqToken` middleware in API calls. Only OAuth2 tokens will have
granular token scopes, while others like BasicAuth will default to scope
`all`.
A large amount of work happens in `routers/api/v1/api.go` and the
corresponding `tests/integration` tests, that is adding necessary scopes
to each of the API calls as they fit.
- [x] Add `Scope` field to `AccessToken`
- [x] Add access control to all API endpoints
- [x] Update frontend & backend for when creating tokens
- [x] Add a database migration for `scope` column (enable 'all' access
to past tokens)
I'm aiming to complete it before Gitea 1.19 release.
Fixes#4300
This PR introduce glob match for protected branch name. The separator is
`/` and you can use `*` matching non-separator chars and use `**` across
separator.
It also supports input an exist or non-exist branch name as matching
condition and branch name condition has high priority than glob rule.
Should fix#2529 and #15705
screenshots
<img width="1160" alt="image"
src="https://user-images.githubusercontent.com/81045/205651179-ebb5492a-4ade-4bb4-a13c-965e8c927063.png">
Co-authored-by: zeripath <art27@cantab.net>
closes#13585fixes#9067fixes#2386
ref #6226
ref #6219fixes#745
This PR adds support to process incoming emails to perform actions.
Currently I added handling of replies and unsubscribing from
issues/pulls. In contrast to #13585 the IMAP IDLE command is used
instead of polling which results (in my opinion 😉) in cleaner code.
Procedure:
- When sending an issue/pull reply email, a token is generated which is
present in the Reply-To and References header.
- IMAP IDLE waits until a new email arrives
- The token tells which action should be performed
A possible signature and/or reply gets stripped from the content.
I added a new service to the drone pipeline to test the receiving of
incoming mails. If we keep this in, we may test our outgoing emails too
in future.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- Move the file `compare.go` and `slice.go` to `slice.go`.
- Fix `ExistsInSlice`, it's buggy
- It uses `sort.Search`, so it assumes that the input slice is sorted.
- It passes `func(i int) bool { return slice[i] == target })` to
`sort.Search`, that's incorrect, check the doc of `sort.Search`.
- Conbine `IsInt64InSlice(int64, []int64)` and `ExistsInSlice(string,
[]string)` to `SliceContains[T]([]T, T)`.
- Conbine `IsSliceInt64Eq([]int64, []int64)` and `IsEqualSlice([]string,
[]string)` to `SliceSortedEqual[T]([]T, T)`.
- Add `SliceEqual[T]([]T, T)` as a distinction from
`SliceSortedEqual[T]([]T, T)`.
- Redesign `RemoveIDFromList([]int64, int64) ([]int64, bool)` to
`SliceRemoveAll[T]([]T, T) []T`.
- Add `SliceContainsFunc[T]([]T, func(T) bool)` and
`SliceRemoveAllFunc[T]([]T, func(T) bool)` for general use.
- Add comments to explain why not `golang.org/x/exp/slices`.
- Add unit tests.
This puts the fuzz tests in the same directory as other tests and eases
the integration in OSS-Fuzz
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
After #22362, we can feel free to use transactions without
`db.DefaultContext`.
And there are still lots of models using `db.DefaultContext`, I think we
should refactor them carefully and one by one.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
There are repeated failures with this test which appear related to
failures in getTokenForLoggedInUser. It is difficult to further evaluate
the cause of these failures as we do not get given further information.
This PR will attempt to fix this.
First it adds some extra logging and it uses the csrf cookie primarily
for the csrf value.
If the problem does not occur again with those changes we could merge,
assume that it is fixed and hope that if it occurs in future the
additional logging will be helpful.
If not I will add more changes in attempt to fix.
Fix#22105
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: delvh <dev.lh@web.de>
- There have been [CI
failures](https://codeberg.org/forgejo/forgejo/issues/111) in this
specific test function. The code on itself looks good, the CI failures
are likely caused by not specifying any field in `TeamUser`, which might
have caused to unittest to return another `TeamUser` than the code
expects.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>